Bids Are Invited For Hiring A Company To Provide Services, With The Supply Of Material, For Corrective And Preventive Maintenance In The Replacement Of Luminaires, Lamps, Relays, Ballasts And Wiring Of The Municipalitys Public Lighting Network, In Accordance With The Conditions, Quantities And Requirements Established In This Notice And Its Annexes.

Led Public Luminaire With Maximum Power 55W Using Led Technology (Light Emitting Diode), Made Of Aluminum Body. Must Meet The Following Characteristics: Single Body Made Of Aluminum Alloy, Injected At High Pressure And Or Extruded Aluminum, Having Self-Cleaning Heat Dissipation Fins; It Must Have An Internal Pressure Relief Valve; Finish Painted By Electrostatic Process In Powdered Polyester Resin; Product Identification Made Through Laser Engraving Directly On The Body Of The Luminaire; As Described In The Generic Standards Below; Minimum Degree Of Protection Ip 66 Total For Optimal Assembly And Driver Compartment; Robust Construction Resistant To Severe Vibrations And The Action Of Winds With Speeds Of 150 Km/H, Resistance To Mechanical Impact Ik-09; Fixing For Arm Or Central Support Of 48.5 Mm With Angle Adjustment Of ± 10° Directly On The Luminaire Without The Use Of An Adapter, Screws Made Of Stainless Material, The Housing Block Must Be Separated From The Optical Assembly. Color Rendering Index (Irc = 70);With Color Temperature Of 5000K; Maximum Power Declared On The Certificate Of 55 Watts: Luminous Efficiency Declared On The Certificate Equal To Or Greater Than 165Lm/W; Must Have A Useful Luminous Flux Of At Least 9,075 Lumens; Transverse Photometric Classification Type Ii Or Iii Longitudinal, Medium Or Long; Bivolt Supply Voltage 110V To 240V, Surge Protector Against Voltage Transients With 10Kv Capacity; Power Factor Equal Or Greater Than 0.92; Total Harmonic Distortion (Thd) Less Than Or Equal To 15%; Operation With Full Brightness Immediately After Power Supply Returns; Useful Life Of 102,000 Hours With 70% Maintenance Of Initial Luminous Flux; The Luminaire Will Be Supplied With A Standard Ansi 3, 5 Or 7-Pin Base And Dimmable Driver (0-10V). Minimum 5-Year Warranty. The Luminaires Must Have Active Registration With Inmetro And Present All The Tests Of Ordinance 20 Updated By 62 Inmetro, The Luminaire Must Have An R Fixing Support, A Public Led Luminaire With A Maximum Power Of 70W Using Led Technology (Light Emitting Diode), The Housing Block Must Be Separated From The Optical Assembly. Color Rendering Index (Irc = 70);With Color Temperature Of 5000K; Maximum Power Declared On The Certificate Of 70 Watts: Luminous Efficiency Declared On The Certificate Equal To Or Greater Than 185Lm/W; It Must Have A Useful Luminous Flux Of At Least 12,950 Lumens: Distribution Diagram Of Luminous Intensities According To Item 4.3.3 Of Nrb-5101:2012; Transverse Photometric Classification Type Ii Or Iii Longitudinal Medium Or Long; Bivolt Supply Voltage 110V To 240V, 5 Or 7 Pins And Dimmable Driver (0-10V). Minimum 5-Year Warranty. The Luminaires Must Have Active Registration With Inmetro And Present All Tests, Led Public Luminaire With Maximum Power Of 75W Using Led Technology (Light Emitting Diode), Having Fins For Heat Dissipation; It Must Have An Internal Pressure Relief Valve; Finish Painted By Electrostatic Process In Powdered Polyester Resin; Product Identification Made Through Laser Engraving Directly On The Body Of The Luminaire; Minimum Degree Of Protection Ip 66 Total For Optimal Assembly And Driver Compartment; Robust Construction Resistant To Severe Vibrations And The Action Of Winds With Speeds Of 150 Km/H, The Housing Block Must Be Separated From The Optical Assembly. Color Rendering Index (Irc = 70);With Color Temperature D