Bids Are Invited For Acquisition And Installation Of Hydration Stations With Cold Water, Hot Water And Water For Pets, For The Municipality Of Campo Belo Do Sul/Sc, With Resources From Amendment 3275/2025.

External Hydration Totem Intended For Public Use In Open Areas, Must Be Built With Materials Resistant To Weather, Intense Use And Possible Acts Of Vandalism. The Totem Must Be Activated By Pushbuttons With Ip68 Protection And 12V Power Supply, Guaranteeing Durability And Electrical Safety. The Entire Electrical System Must Comply With Standards Nbr 5410 And Iec 60335-2-35, Including Adequate Grounding And Housing Insulated Against Electrical Shock. Hydraulic And Electrical Connections Must Be Suitable For External Environments And Compatible With The Public Infrastructure Available At The Installation Site. The Equipment Must Be Fixed Using Parabolts Or A Similar System That Guarantees Stability And Resistance In Open Spaces. The Solar Energy System Must Be Integrated To The Equipment With Discreet, Resistant And Dimensioned Photovoltaic Panels To Ensure Charging Of Usb Modules And Other Auxiliary Components, Including A Charge Controller And Battery For Storage. The Filtration System Must Have A Class C Filter Element, Certified By Inmetro, Installed In A Location Of Easy Access For Inspection And Replacement. The Equipment Must Fully Comply With Inmetro Ordinance No. 102/2022, Possessing All Required Certificates Or Conformity Seals. Water Outlets Must Be Designed To Avoid Splashes, Ensuring Laminar And Clean Flow, With A Design That Prevents Cross-Contamination Between Users, Tampering And Airborne Deposits. The Equipment Must Have An Integral Hood Protector And A Container With A Drainage Hole That Allows Unconsumed Water To Flow Directly Into The Drainage System. The Chilled Water Module Must Have A Reservoir With A Minimum Capacity Of 10 To 12 Liters, Made Of 304 Stainless Steel Or Equivalent Antibacterial Material, Equipped With An Internal Coil, Insulation Thermal And Adjustable Thermostat, With The System Being Fully Shielded To Prevent Leaks. The Hot Water Module Must Have A Reservoir