Tenders Are Invited For Construction Of Road Lighting In The Głusk Commune

4.1. The Subject Of The Order Is Construction Of Road Lighting In The Głusk Commune.4.2. The Subject Of The Order Is The Construction Of Road Lighting In The Głusk Commune. The Scope Of Construction Works Mentioned Above. The Subject Of The Order Includes The Construction Of The Following Road Lighting: 1) Construction Of A Cable Line For Road Lighting On The Municipal Access Road (Plot No. 156) On Porzeczkowa Street In Wilczopole - The Scope Of Works In Particular Includes: - Construction Of A Cable Line (Length Of The Cable Route) - 551 M, Galvanized Round Steel Poles, 7 M High, With Single Semi-Circular Booms With An Angle Of Inclination 10O, Height 1 M And Boom 1.5 (Designed Height Of The Light Point 8 M), Mounted On Prefabricated Concrete Foundations With Led Lighting Fixtures With A Power Of 36 W - 42 W, 12 Pieces (12 Sets In Total); - Tests And Measurement Works, Earthing Resistance Of Poles, Testing Of The Low-Voltage Cable Line; - Works On The Reconstruction Of Lawns And Crushed Stone Surfaces Along The Completed Works; - Preparation Of As-Built Documentation; - The Constructed Road Lighting Will Be Connected To The Existing Wilczopole St-3 Lighting Cabinet Owned By The Głusk Commune And, On The Other Hand, By Dividing The Network In The Existing Pole No. 17, To The Existing Wilczopole St-13 Lighting Cabinet. In Wilczopole - The Scope Of Works Includes In Particular: - Construction Of A Cable Line With A Route Length Of 157 M, On Galvanized Round Steel Poles, 8 M High, With Single Semi-Circular Booms With An Inclination Angle Of 5O, Height Of 1 M And Boom Of 1.5 (Designed Height Of The Light Point 9 M), On A Concrete Foundation And Led Luminaires With A Power Of 36W - 42W - 4 Sets; - Measurement Works, Earthing Resistance Of Poles, Testing Of The Low-Voltage Cable Line - Lawn Restoration Works; - The Constructed Lighting Will Be Incorporated Into The Existing Lighting Cabinet Wilczopole 6. 3) Detailed Requirements Of The Ordering Party For Luminaires And Poles: Led Luminaires (For The Above Lighting) Are To Meet The Following Minimum (Not Inferior) Technical Parameters. - Power Of The Luminaires 36W - 42W (Before Installation, Agree On The Power Of The Luminaires With The Ordering Party) - Neutral Light Color In The Range Of 3500 K - 4000 K, Luminaire Body With Ip66 - Tightness Class; - Mounting Bracket Must Allow For A Minimum Of 100,000 Hours Of Tilt Angle Defined At L90b10, - Initial Luminous Efficiency Of The Luminaire At Least 135 Im/W, - Reactive Power Factor Cos (Fi) >=0.93, - Hinges And Adapters To Adjust The Mounting Angle Of The Luminaire. Programmable Power Supply With Active Function Of Maintaining A Constant Light Flux, Autonomous Power Reduction Function And Dali, The Luminaire Should Have 10 Kv Surge Protection, Ip66 Quick Connectors For Easy Installation Without Opening The Luminaire, It Should Have An Ec Declaration Of Conformity And A Certificate Of An Accredited Research Center Confirming The Declared Compliance,