Bids Are Invited For Acquisition Of Network Equipment And Materials With The Objective Of Restructuring The Network Infrastructure Of The Headquarters Of The Municipal Transport And Transit Superintendence.

High Performance Triband Access Point With Support For Wi-Fi 7. Specification: The Access Point Must Be Intended For Corporate Environments, With Support For The Wi-Fi 7 Standard (Ieee 802.11Be), Operating Simultaneously In The 2, 4 Ghz, 5 Ghz And 6 Ghz Bands. It Must Support Throughput Aggregation Exceeding 9 Gbps, With At Least 4 Spatial Flows Per Band, And Mu-Mimo And Ofdma Technologies. It Must Have At Least 1 2.5G Ethernet Interface (10/100/1000/2500 Mbps) With Power Via Poe In 802.3Af Or 802.3At Standards. If The Poe Injector Or Source Is Not Included With The Equipment, It Must Be Supplied Separately. The Equipment Should Allow The Creation Of Multiple Ssids With Vlan Support, Seamless Roaming, Automatic Channel And Power Selection, And Security Features Such As Wpa3, Radius And Client Isolation. Be Manageable Via Local Or Remote Controller, With Web Interface For Configuration And Monitoring. Management Should Allow Device Control, Traffic Visualization, And Policy Enforcement. The Equipment Must Allow Installation On A Ceiling Or Wall, And Come With The Necessary Supports And Accessories For Assembly. It Must Operate At An Ambient Temperature Of 0 ºc To 40 ºc, With Relative Humidity Of Up To 90%, Without Condensation. All Components And Accessories Necessary For Operation Must Be Included With The Equipment. The Minimum Required Warranty Is 12 Months And Technical Assistance Must Be Available In The National Territory., Crimping Pliers With Ratchet. Specification: The Rj45 Crimping Pliers Shall Be Designed For Crimping Rj45 And Rj11 Connectors On Utp And Ftp Network Cables, With Ratchet Mechanism For Pressure Control. Made Of High-Strength Steel, The Pliers Must Guarantee Durability And A Long Service Life. It Must Be Compatible With 24 Awg To 26 Awg Cables And Allow Pressure Adjustments For Different Cable Gauges. The Pliers Must Have An Integrated Cutting Blade To Cut Off Excess Cable After Crimping. The Design Must Be Robust, Allowing Rj45 Connectors To Be Crimped Quickly And Efficiently, With Precise Pin Alignment To Ensure Safe And Quality Connections. Guarantee: The Supplier Must Offer A Minimum Guarantee Of 12 Months Against Manufacturing Defects, With Replacement Or Repair Of The Product, According To The Agreed Terms., Insertion Pliers For Keystone. Specification: The Keystone Insertion Pliers Must Be Designed For Installing Keystone Type Connectors In Sockets And Panels, With An Efficient Pressure System To Ensure A Firm And Safe Connection. The Device Must Be Compatible With Keystone Connectors Of Different Categories (Cat5e, Cat6, Etc.), Allowing The Insertion And Cutting Of Excess Wire In A Single Operation. Made Of High-Strength Steel, The Pliers Must Have An Ergonomic Design, With A Non-Slip Handle To Ensure Comfort And Safety During Use. The Pliers Must Be Light And Easy To Handle, Suitable For Use In Installations And Maintenance Of Structured Cabling Systems. Warranty: 12 Months Against Manufacturing Defects., Utp Cat5e Network Cable 100% Copper 305 Meters.. Specification: Utp Cat5e Network Cables Must Be Manufactured With High Quality Copper Internal Conductors (100%), Ensuring Low Electrical Resistance And Excellent Conductivity For Data Transmissions. The Cable Must Be Category 5E, Meeting Ansi/Tia-568-C.2 And Iso/Iec 11801 Standards, Allowing Support For Transmission Speeds.