Tenders Are Invited For Thermal Modernization Of The Sports Hall In Koniecpol Using Renewable Energy Sources

The Subject Of The Order Is The Performance Of Construction Works Consisting In The Thermal Modernization Of A Sports Hall Located In Koniecpol At Ul. Szkolna 17, With A Ground-Floor Entrance Area And A Two-Story Cloakroom And Sanitary Facility. Thermal Modernization Includes Insulation Of Foundation Walls And External Walls, Insulation Of The Roof Of The Sports Hall Made Of Sandwich Panels And Ventilated Flat Roofs Of The Cloakroom And Sanitary Facilities Along With The Necessary Sheet Metal Work, Replacement Of Window And Door Joinery, Installation Of External Blinds To Limit Overheating Of The Hall, Renovation Of The Entrance Area Including Cladding With Stoneware Slabs, Painting Of Metal Elements - Railings And Steel Roof Structures, Reconstruction Strips Around The Building, Renovation Of The Lightning Protection System, Construction Of A Photovoltaic Installation, Replacement Of Fluorescent Lamps With Led Lamps, Replacement Of The Central Heating Installation, Installation Of Heat Pump Technology With Tanks And A Buffer, And Construction Of A Hot Water System. The Scope Of Work To Be Performed Includes: 1) Construction And Installation Works Related To Thermal Modernization And Renewable Energy Sources, Including: A) Insulation Of Foundation Walls With Extruded Polystyrene. 12 Cm With Protection Of The Plinth Layer To A Depth Of 10 Cm Below The Ground Level With Plinth Plaster; B) Insulating The External Walls Using A Slightly Wet Method With Styrofoam Thickness. 16 Cm With Thin-Layer Plastering Made Of Silicone Plaster; C) Insulating The Hall Roof With Pir Al Insulating Boards, Thickness. 10 Cm With Waterproofing Made Of A Thick Pvc Membrane. 1.5 Mm; D) Insulation Of The Flat Roof With Pir Al Insulating Boards, Thickness 10 Cm Tongue-And-Groove Type With Waterproofing Boards Made Of Pvc Membrane. 1.5 Mm; E) Execution Of Necessary Sheet Metal Work, Including External Window Sills, Gutters And Downpipes Made Of Coated Sheet Metal. 0.5 Mm In Ral 7024; F) Replacement Of The Existing Window And Door Joinery With Joinery Made Of Aluminum Profiles, With Triple Glazing; G) Installation Of External Blinds (On The Western Wall), Façade Blinds With Profiled Slats Towards The Inside Of Increased Stiffness, With Tilt Angle Control Using A Wirelessly Controlled Electric Drive; Color Ral 7024;H) Installation Of A Photovoltaic Installation With A Rated Power Of 23.8 Kwp Along With The Necessary Cabling, Switchgear, Inverters And An Energy Measurement System And A Display Enabling Reading Of The Amount Of Electricity Generated By The Installation, Located In An Easily Accessible Place;I) Central Heating Installation - Dismantling The Existing Installation Together With Existing Radiators, Installation Of Thermostatic Valves Together With Heads And Valves Shut-Off Valves, Installation Of Control And Shut-Off Valves On The Branches Of The Installation, Installation Of Control Valves On The Manifold, Installation Of Drain Valves At The Lowest Points Of The In