Controller For Solid Fuel Boiler. This Is An Electronic Control Unit Designed To Automatically Control The Operation Of A Heating Boiler. Purpose: Automatic Control Of A Solid Fuel Boiler - Maintaining The Set Temperature, Controlling The Fan And Circulation Pump. Main Functions: Fan (Air Blower) Control. Circulation Pump Control. Control Of Water Temperature In The Boiler. Displays The Current Temperature. Sound And Light Alarms (Overheating, Sensor Error, Etc.). Overheat Protection. Control Mode. Stop And Start Function. Technical Parameters: Supply Voltage No Less Than: ~220 V / 50 Hz. Maximum Fan Load Power: Up To 200 W. Maximum Pump Load Power: Up To 300 W. Measured Temperature Range: 0 – 90 °C. Measurement Accuracy: ±1 °C. Operating Ambient Temperature: 0 – 40 °C. Temperature Sensor: Ntc 10 Kohm (On Wire). Housing Protection Class: Ip20. Installation: Surface-Mounted, With Cable Connection., Circulation Pump For Heating Systems, Power: No Less Than - 87/74 W (Probably 2 Speeds), Voltage: No Less Than -220 V, Motor Power No Less Than - 245 W, Frequency: 50 Hz, - Max. Pressure: No Less Than 4 M, Max. Productivity: Not Less Than 50 L/Min, Connection: Threaded, Protection Class: Probably Ip44, Installation Length -180 Mm, Connection (Inlet / Outlet) - Threaded 1 ¼ (G 1¼), Housing Material - Cast Iron.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
