Anti-Fraud Seal For Water Meter With Internal Metal Or High-Resistance Polycarbonate Mechanism, Armored And Independent, Stainless Steel Cord With Pvc-Coated Or Heat-Treated Tension At The Tip, Diameter Of 1.0 To 1.2 Mm And Useful Length Of 0.60 Cm. Manufacturers Mark Printed On The Sealing, Personalized With Saae Logo And Numbered Sequentially With 07 Digits, Minimum Font 12, Laser Engraving. The Use Should Not Require The Use Of Tools. Delivery = Package With 100 Seals, Identified With Relation To The Seals Contained There., Polypropylene Seal, Disposable, Made In Red Color, Numbered Sequentially, With Inscription: Avoid Fines Do Not Violate The Seal, And With The Saae Logo, Both Letters In White Color Or Reinforced Laser Inscription And Arial 12 Font High Case Two Sides Of The Seal, Allow Manual Closing Without The Use Of Tools Or Pins, Maximum Length Of 140 Mm, Maximum Width Of 80 Mm, Maximum Height Of 80 Mm, With Its External Hole Measuring Between 40 And 45 Mm, Resistant To Ultraviolet Rays, With An Internal Protective Barrier That Prevents Access To The Register, For Cutting In Pipes Up To A Diameter 3/4., Dn 3/4 Soft Rubber Gasket, Black Color, For Standard Saae Hydrometer., Dn 1 Gasket, Soft Rubber, Metal Nut Dn 3/4, 03/12/2025 - 08:11:17
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
