Bids Are Invited For 1.1. The Purpose Of This Tender Is To Choose The Most Advantageous Proposal For The Installment Acquisition Of Household Appliances, Electronics And Furniture For The Municipal Education Network, Aiming To Meet The Needs Of Early Childhood Education, Elementary Education And Other Sectors Linked To The Municipal Department Of Education Of The Municipality Of Mãe D’Água - Pb, In Accordance With The Specifications Contained In The Term Of Reference Annex I Of The Notice.

Set For Teacher Consisting Of A Table And A Chair. - Table With Mdf Top, Covered On The Upper Side With High-Pressure Melamine Laminate And On The Lower Side With A Balancing Plate, Front Panel In Mdf, Covered On Both Sides With Low-Pressure Melamine Laminate (Bp), Mounted On A Tubular Steel Structure. - Stackable Chair, With Seat And Back In Injected Polypropylene Or Molded Anatomical Plywood, Assembled On Tubular Steel Structure. Dimensions And Tolerance-• Width- 1200Mm, • Depth- 650Mm, • Height- 760Mm, • Thickness- 19.4Mm, • Tolerance- Up To + 2Mm For Width And Depth, +/- 1Mm For Thickness And +/- 10Mm For Height. Features- • Top In Mdf, 18Mm Thick, Covered On The Top Surface In High Pressure Melamine Laminate, 0.8Mm Thick, Textured Finish, In Gray Color, Rounded Corners. Coating On The Lower Face In 0.6Mm Balancing Plate (Against Phenolic Plate). Application Of Claw Nuts With Metric M6 Thread And 10Mm Length. • Front Panel In Mdf, Coated On Both Sides In Low Pressure Melamine Laminate – Bp, Frost Finish, In Gray Color. • Finished Dimensions Of 1117Mm (Width) X 250Mm (Height) 6Mm For Thickness. • Tops Headed With Extruded Thermoplastic Maple Tape, Made Of Pvc (Polyvinyl Chloride), Pp (Polypropylene) Or Pe (Polyethylene), With Primer On The Bonding Face, Textured Surface Finish, Glued With Hot Melting Adhesive. • Structure Composed Of- - Vertical Uprights And Longitudinal Crossbeam Made Of Cold Rolled Carbon Steel Tube, With Seam, Semi-Oblong Section Of 25Mm Depth- 750Mm +/- 50Mm, • Height- 730Mm +/- 30Mm. Features- • Upper Coating In Pvc Laminate With Reinforcement In Blanket (Korino) Cv 20, • Lower Finish In Raffia Fabric, • Structure- - Pine And Eucalyptus Wood From Reforestation With Immunization Against Mold, Termites And Microorganisms. - Seat And Back Support With High-Resistance Elastic Straps. - Locking The Structure With Clamps Fixed With Pneumatic Staplers. • Polyurethane Foams - - Seat - Density D- 23 - Armrest - Density D-20 - Backrests - Density D-20, Stackable Youth Rectangular Set With Table And Benches Of 2 Meters. Suitable For Ages 7 To 10 Years. Model Sc 968 / Sc 969. Top - Mdp Or Mdf 18Mm Coated In Formica. Color White Stackable Structure- 20X40mm Steel Tube With 2Mm Pvc Edge, White Epoxy-Powder Painting. Table Measurements- 2000X600mm. Height 655Mm. Bench Measurements - 2000X300mm. Height 380Mm.Capacity- 3 To 4 People Each Side 46 Cm, Height 181 Cm., Fixed Upholstered Chair, Without Arms, Mounted On A Tubular Steel Frame With Four Legs. Dimensions And Tolerance-• Seat Width- 500Mm +/- 50Mm, • Seat Depth- 460Mm +/- 10Mm, • Seat Height- 430Mm +/- 10Mm, • Backrest Width- 400Mm +/- 10Mm (Measured At The Most Prominent Point Of The Lumbar Support), • Backrest Vertical Extension - 350Mm +/- 10Mm, • Foam Thickness D