Tenders Are Invited For Thermal Modernization Of The Osp Building In Mikołajewice

1. The Subject Of The Order Is The Execution Of The Scope Of Insulation Works Together With Accompanying Works Of The Volunteer Fire Department Building Located In Mikołajewice 21A, Irządze Commune. 1) Existing Condition: Building Structure: The Building Was Constructed Using Traditional Technology In 1998. In Approximately 2013, A Single-Car Garage Was Added. Foundations - Concrete Footings, Poured On Site. External Walls - Made Of 38 Cm Thick Cinder Block, Covered With Cement Plaster. Inter-Storey Ceiling - Wooden Structure With A Floor Made Of 3 Cm Thick Boards Placed On Trusses, Locally Covered With A 5 Cm Layer Of Styrofoam. Roof - Wooden Truss Structure, Covered With Asbestos-Cement Boards Of The Eternit Type. Windows - Pvc Windows In The Entire Building In Good Technical Condition (1 Window Needs To Be Replaced Due To A Cracked Glass). Door Joinery - Wooden Entrance Doors In Poor Technical Condition, Steel Garage Gate In Poor Technical Condition. Ventilation - Gravity.Central Heating – Coal Furnace. Domestic Hot Water. - None. The Building Is Located On A Plot With Registration Number 99/2, District 0003 Mikołajewice, Registration Unit 241603_2 Irządze. Characteristic Parameters Of The Building Facility Volume: 1090.39.00 M3 Area: Area: Buildings: 343.28 M2area Usable Area: 295.28 M2 Number Of Floors: · Underground (Partially) 1 · Above-Ground 12) The Scope Of Works Includes: Construction Industry: Preparatory Works - Preparatory Works Related To Fencing The Work Area While Maintaining A Safe Distance From Communication Routes For Pedestrians; - Preparatory Works Related To Erecting Scaffolding, Securing Windows, Doors And Removing Elements On Façade. Dismantling Works Dismantling Of The Buildings Existing Lightning Protection System. Dismantling Of Window Sills And Other Sheet Metal Flashings That Are Not Suitable For Re-Use. Dismantling And Disposal Of The Existing Roof Covering Of The Volunteer Fire Department Building And The Garage Building. Dismantling Of The Existing Gutters - Gutters And Downspouts As Well As Roof Soffits. Dismantling Of The External Door Joinery To The Building And Garage Door. Disassembly Of 1 Window To Be Replaced. Insulation Of The External Walls Of The Building. Preparation Of The Surface For Insulation By Washing The Wall Surfaces, Mechanical Cleaning Of The Existing Plaster Surface With Brushes (Elimination Of Dust) And By Priming Twice With A Systemic Primer. Filling In Any Surface Defects With Cement Mortar, Leveling The Façade Surface Before Performing New Insulation Works. Using A Double Layer Of Insulation. Reinforced Mesh On Insulated Walls Up To A Height Of 1.2 M From The Plinth In Order To Strengthen The Surface Against Impacts. Insulation Of The External Walls Of The Building With 16 Cm Thick Styrofoam With A Coefficient Λ = 0.033 W/Mk, Covered With Silicone Plaster, Granulation Of 2 Mm. Insulation Of Window Jambs With Styrofoam With A Thickness Of 1 To 3 Cm - Plaster. Silicone, Granulation