Tenders Are Invited For Construction Of A Village Community Center In Siedliska

Task Titled: Construction Of A Rural Community Center In Siedliska Includes The Comprehensive Construction Of A Rural Community Center Building Along With The Development Of The Space (Area) Around The Constructed Facility. On The Premises Of The Employers Own Plots Of The Medyka Commune, I.E. Plots No. 451/1, 450/2, 800/1, 800/2, 452/3, 452/4 Located In Siedliska (District 0006), Medyka Commune, Przemyśl County. Characteristic Parameters Of The Facility. 1. Type Of Facility: Public Utility Building - Village Community Center Category Of Building Facility - Ix2. Utility Program In Accordance With The Description And Floor Plans3. Spatial Layout3.1. Village Community Center Building, Detached.3.2. Storeys: Above Ground - 2, Underground - 0.3.3. A Building With A Gable Roof With A Slope Angle Of 35 Degrees.3.4. Roof Covering: Sheet Metal Roofing 3.5. Facades In Neutral Colors In The Landscape, Adapted To The Color Of The Covering, Using Facade Ceramics And Wood.4. Characteristic Parameters Of The Building.4.1. Cubature - 3470.00 M34.2. Building Area - 453.11 M24.3. Usable Area - 637.24 M24.4. Building Height From Ground Level To The Top Of The Main Ridge 10.06 M4.5. The Width Of The Front Elevation Of The Building Is 12.64 M4.6. Building Length 34.24 M5. Development Of The Area Around The Building: 5.1. Parking Lot And Access Areas: Approx. 2,261.76 M2.5.2. Fencing Of The Area With An Entrance Gate And A Gate. Along The External Outline Of The Plot Boundaries. A Detailed Description Of The Subject Of The Order Along With Technical Solutions Can Be Found In The Design Documentation Attached To This Procedure, Which Includes: 1. Land Development Project.2. Construction And Technical Designs;3. Bills Of Quantities4. Detailed Technical Specifications For The Execution And Acceptance Of Works. The Basis For The Valuation Is The Attached Design Documentation. The Bills Of Quantities That The Ordering Party Attaches To The Procedure Documentation Are An Auxiliary Element. Note: If The Description Of The Subject Of The Order Or The Design Documentation And Work Bills Attached To The Swz Would Indicate Trademarks, Patents Or Origins As Well As Standards, Approvals, Technical Specifications And Reference Systems For Certain Materials Or Devices, The Ordering Party Allows The Offer Of Materials, Devices Or Equivalent Standards. In The Case Of Standards, Approvals, Technical Specifications Or Reference Systems, Equivalent Means The Use Of A Standard Specifying Parameters, Technologies And Quality Of Workmanship Not Worse Than Those Adopted In The Calculations Or Shown In The Drawings. The Names Of Materials Or Devices Used In The Description Of The Subject Of The Order, Indicating A Specific Manufacturer And/Or Product Name, Only Define Exemplary Functional Properties That The Materials Or Devices Offered By The Contractor Must Meet And Are Used To Specify The Functional Properties In Relation To A Specific Example Of A Product/Set. The Ordering Party Requires