Bids Are Invited For Acquisition And Installation Of Cleaning Equipment Using Hydro Blasting

Hydrojetting Equipment To Be Installed In The Agrale Vehicle Model A10000 Euro Vi, Composed Of: Triplex Alternative Pump To Operate Simultaneously With The Following Minimum Specifications: Flow Of 128 Liters/Minute And Pressure Of 120 Kgf/Cm² Simultaneously. The Triplex Alternative Pump Will Be Driven Through Pulleys And Belts With A Transmission System From A Pneumatic Coupling Power Take-Off, To Be Installed In The Gearbox Of The Vehicle Itself. Pressure Gauge And Ball Valve With “By-Pass” System For The Tank. Reservoir With A Minimum Capacity Of 3,500 (Three Thousand And Five Hundred) Liters, Made In Cylindrical Shape And Bulged Tops In Steel Sheet. Side Ladder For Access To The Top Of The Tank, With Handrail And Step With Checkered Plate. The Water Compartment Must Contain: Wave Breaker On The Inside, Nozzle For Loading By Hydrant, Tool Box On The Sides With Lower Hinge, Including Locking And Key Lock. For Mud With Mudguards. Rear Bumper According To Current C.N.T. Standards. The Command/Control Panel Will Be Installed At The Rear Of The Equipment, Containing The Following Accessories: Throttle Control; Tachometer For Engine Rotation Control; Equipment Operating Hour Meter; Panel Light Switch; Switch For Rear Auxiliary Lights; Switch For Rotary Beacon; Rev Counter To Control Engine Rotation; Manometer For Water Pressure. “Flag” Type Main Reel Sized To Store 120 Meters Of High Pressure Hose With A Diameter Of 3/4’’, Consisting Of A Guide For Winding The Hose In Order To Avoid Reassembly And Overlapping Of Layers In An Irregular Manner. Main Spool Must Be Installed At The Rear Of The Tank, With An Independent Support Structure, With Hydraulic Drive In Both Directions Of Rotation. The Secondary Or Auxiliary Reel Will Be Sized To Store A Minimum Of 40 Meters Of High Pressure Hose...