Agricultural Machinery – K2567 1 Tractor With 2 Stem Crusher Adapters. Delivery And Servicing Of 1 Tractor And 2 Compatible Adapters For Bkm Budapesti Közművek Nonprofit Zrt. As Part Of A Sales Contract With Service. The Primary Tasks Of The Equipment To Be Purchased (1 Tractor And 2 Adapters Compatible With It) Are To Cut And Care For Less Frequently Mowed Green Surfaces. One Of The Adapters Is A Horizontal Shaft Crushing Device With Y Knives Mounted On The Rear Three-Point Suspension Of The Tractor, The Other Device Is A Similarly Mounted Hammer Horizontal Shaft Crushing Device. On The Treated Surface, The Grass Height Is Over 15 Cm, And In Some Cases Woody Plants May Also Occur. We Want To Cut Grassy, Untreated Green Surfaces With The Hammer Stalk Crusher, While Treated Areas With Tall Grass Are To Be Cut With The Y Blade Adapter. The Maximum Working Width Of The Y Knife Stalk Crusher Is A Maximum Of 155 Cm, While The Maximum Working Width Of The Hammer Stalk Crusher Is 155 Cm. The Tractor Must Be Equipped With A Diesel Engine, A Water-Cooled Engine, And A Stepless Hydraulic Drive. The Speed Of The Rear Cardan (Pto - Power Output Shaft) Should Be Consistent With The Drive Demand Of The Installed Stalk Crushers. We Ask That You Install A Yellow Flashing Light On The Tractor. Expected Operating Time Of The Tractor Is 500 Operating Hours/Year, The Operating Time Of The Adapters Is Expected To Be 300 Operating Hours/Year In The Case Of The Y Knife Stalk Crusher, 200 Operating Hours/Year In The Case Of The Hammer Stalk Crusher. Delivery And Installation Takes Place At The Premises Of The Buyer Bp. 1106 Budapest, Keresztúri Út 130. Within 10 Working Days Of Handover, Handling And Maintenance Training For The Delivered Machines And Adapters Must Be Held For The Buyers Employees. A Minimum Of 2 People Are Required To Be Trained In Handling The Machines. The Training Must Be Held Once At The Place Of Performance. The Approximate Duration Of The Training Is 1-2 Hours. The Offered Tractor And Adapters Can Only Be New. The Tenderer Means The Following By New: The Tractor Is Manufactured In 2024 Or Later, Has Not Yet Been Put On The Market And/Or Used As Intended, Or Has Only Been Used For The Duration Of The Necessary Adjustments And Testing, For A Maximum Of 10 Operating Hours, The Adapters Are Manufactured In 2024 Or Later, There Are No Signs Of Wear And Tear From Use. The Detailed Technical Requirements Can Be Found In The Technical Description, 1/B, Which Is Part Of The Tender Documentation. No. Included In The Annex Or The Draft Contract.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
