Bids Are Invited For Contracting A Company To Supply Personal Protective Equipment

Welders Apron, Made Of Leather Scrap, Seamless, Measuring 0.60 Mm, Without Internal Lining, In Black., 11/29/2025 - 08:20:08, Size 41, Size 42, Size 44, Size 45, Size 46, Size 47, Two-Tone Pvc Boot, Non-Slip Sole, With Nitrile Rubber, Polyester Lining, Long Shaft, In Black, With Steel Toe Cap, N° 40., N° 41., Pvc Boots, N° 45/46., Upper To The Groin, Special For Mud And Work In Wetlands Or Wetlands, N° 44/45, Waterproof Bib Boots With Ca, Number 41, Made From Rubberized Synthetic Fabric, With A Minimum Thickness Of 0.20Mm, Composition 30% Polyamide (Internal), And 70% Polyvinyl Chloride (External), With A Weight Of 190Gr/M2. Color: Yellow. With Pvc Boots Attached And Waterproofed At Its Junction. The Overalls Must Be Closed Using A Five-Thread Overlock And The Seams Must Be Stitched Using A Simple Straight Machine, With 100% Polyamide No. 60 Nylon Thread. The Overalls Must Have A Strap To Adjust The Shoulders And A Drawstring To Adjust The Waist. The Seams Must Be Waterproofed Through A Thermofusion Sealing Process, By Joining Two Layers Of Fabric Using A Thermofusible Film Or A Different Method, Completely Isolating Possible Moisture Infiltration, Also Being Extremely Flexible, Not Compromising The Waterproofness Of The Epi, With High Resistance To Tearing. The Pieces Must Receive Labels Identifying The Manufacture, Fabric Composition, Piece Size And Other Useful Recommendations. Color: Yellow, Pantone 108. Closing Using A Five-Thread Overlock And The Seams Stitched In A Simple Straight Machine, With 100% Polyamide Nylon Thread No. 60. The Zipper Must Be Made Of 70% Nylon And 30% Polyester No. 5, 650 Mm Long, Protected By A Closed Zipper, Mounted In The Opposite Direction When Closing The Cover. Smooth, Fixed And Flapless Hood, With Two Nickel-Plated Iron Eyelets With A 7 Mm Opening For Better Cord Passage. At The End Of The Sleeve, Cuffs Made Of Polymeric Material, Composed Of 73% Polyester And 27% Elastodiene, With A Width Of 25 Mm And Covered With Synthetic Rubberized Fabric Material In The Same Color As The Fabric, Composed Of 30% Polyamide And 70% Polyvinyl Chloride, And Internal Finishing With Overlock, Must Be Sewn. The Cover Is Ventilated Through Circular Openings Measuring 23 Mm In Diameter On The Front And Back Of The Chest, Covered By A Visor Made Of The Same Fabric. The Seams Must Be Waterproofed Through A Thermofusion Sealing Process, By Joining Two Layers Of Fabric Using A Thermofusible Film, Completely Isolating Possible Moisture Infiltration, Also Being Extremely Flexible And Not Compromising The Waterproofness Of The Epi. Application Of The Semae Logo In Silkscreen Printing On The Chest. Reflective Strips 50 Mm Wide And Sewn And Waterproofed, On The Chest Throughout Its Circumference With Reflective Material (Microprismatic) Should Preferably Be Light And Flexible And Have High Retroreflective Brightness At Night And With A Daytime Appearance On The Chest