Bids Are Invited For Future And Eventual Acquisition Of Vehicles, Machines And Equipment, Intended For The Municipal Works Department, In Order To Meet The Demands Necessary For The Execution Of Infrastructure Services, Maintenance And Conservation Of Public Roads And Other Activities Under The Responsibility Of The Municipality, In Accordance With The Conditions, Quantities And Requirements Of Annex Iv – Term Of Reference And Other Annexes To This Notice – Financing: Bdmg.
Bids Are Invited For Future And Eventual Acquisition Of Vehicles, Machines And Equipment, Intended For The Municipal Works Department, In Order To Meet The Demands Necessary For The Execution Of Infrastructure Services, Maintenance And Conservation Of Public Roads And Other Activities Under The Responsibility Of The Municipality, In Accordance With The Conditions, Quantities And Requirements Of Annex Iv – Term Of Reference And Other Annexes To This Notice – Financing: Bdmg.
Arm For Mini Backhoe Loader Equipment For Use In Mini Loaders - The Implement Must Have A Reinforced Structure For All Sheet Metal; Turning System With A Minimum Angle Of 85º For Each Side; Command Through Manifold Block; Joystic Operation; Oil Flow Control Valves., Hydraulic Weeding Equipment To Be Attached To Mini Wheel Loaders, Used In Cleaning Public Roads, Patios And Hard-To-Access Places; With Quick Couplings, Flat Face, Arm Adjustment With At Least 3 Positions; Protection Bandana Against Throwing Debris, Positioning Of Cables At An Angle, Providing Greater Efficiency, With A Minimum Of 14 Units. Of Cables, Weeding Area With Minimum 600Mm; Average Oil Flow Of 40-80 L/Min., Road Painting Equipment To Be Attached To A Single Cab Vehicle: Chassis• Equipment Mounted On Chassis With Loading Platform Dimensions And Pbt Of Up To 1,500 Kg And Body Width Up To (L X W X H = 2,900 X 1,540 Rain And Internal Led Lighting;• Structure Closing In The Compressor Area With Led Lighting Mounted On Expanded Plate In Order To Facilitate Cooling And Avoid Accidents;• Checkered Steel Plate Flooring In People Flow Areas With Led Lighting;• Front Alignment Guide;• 180 Degree Tilting Side Stairs With Stop In The Open Position And Latch With Spring In The Closed Position;• Swinging Rear Cover With Chains For Locking At 90 Degrees;• 02 Tables With Manual Opening System, For Automatic Guns (Left And Right) With Manual Lifting;• Pantograph Table And Guide Control Station: Operator Command Station With All The Instruments Necessary For Operation In Manual Mode And 1 Automatic Programmer With Cadence Programming Pre-Programmed For Quick Use And A Range Of Other Options, This Control Station Must Be Accessible From Both The Inside And The Outside. Reservoirs• 02 Pressurized Paint Tanks Of At Least 110L Each, In Hot-Dip Galvanized Steel, Equipped With Hydraulic Agitators That Are Independent Of The Lids, Lids That Close Without The Use Of Keys And Tools And With Sealing Resistant To Paints And Solvents, Pressure Gauge And Safety Valve; • 01 Pressurized Paint Tanks Of At Least 40L, Pressure Gauge And Safety Valve; 4X4 Traction, With Minimum Operating Weight Of 3,000Kg, Zero Km, Current Year, Diesel; Power Of At Least 60 Hp, Closed Cabin With Air Conditioning; Rops/Fops Certification; Turbo Powered; 04 Cylinders; Tier 3/Mar-I Lifting Mechanism, Minimum Wheelbase 1,200 Mm. Operating Load Of At Least 900 Kg; Bucket With Minimum Capacity Of 0.40M³; Vertical Or Radial Lift Arm Travel; Loading Height Of At Least 3,000Mm; Rear View; Fuel Level Indicator; Minimum Fuel Tank Of 70 Liters; Hour Meter; Panel Containing All Basic Instruments And Switches For The Proper Functioning And Monitoring Of The Equipment. Hydraulic System Flow Sufficient To Use Implements (Mini Retro Arm, Hydraulic Weeder, Compactor Roller, Collecting Broom, Etc). Brand Presented With Factory In Brazil And Company With Its Own Physical Structure, Approved By The Equipment Manufacturer
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
