Tenders Are Invited For Acquisition Of A Cattle Burial Ground 1.8 Km From The Dolinsky And Ankatinsky Rural Districts.

Acquisition Of A Cattle Burial Ground 1.8 Km From The Ankatinsky Rural District. Description Of The Necessary Characteristics Of The Purchased Cattle Burial Ground. The Year Of Construction Of The Grave Is No Earlier Than 2025. The Total Area Of ​​The Cattle Burial Ground Should Be 32.5 Square Meters. M. The Cattle Burial Ground Should Have A Length Of 5.70 And A Width Of 5.70 Meters On The Outside, A Length Of 5.10 And A Width Of 5.10 And A Depth Of 3.6 Meters On The Inside. The Design Of The Tank Is Spatial. Strength And Stability Are Ensured By The Joint Work Of The Floor Slabs With The Longitudinal And Transverse Walls Of The Tank. The Foundations Are A Monolithic Reinforced Reinforced Concrete Slab 30 Cm Thick Made Of C16/20 Concrete. Under The Foundations, Preparation Is Made With A Thickness Of 100 Mm, Spilled With Bitumen. The Walls Of The Tank Are Foundation Blocks Fbs T. 24-3-6 Covering Slabs - A Reinforced Monolithic Reinforced Concrete Slab With A Hatch, 200 Mm Thick, Made Of C16 / 20 Concrete. The Unloading Tray Is Made Of Metal Structures. A Concrete Blind Area 1.0 M Wide Is Installed Along The Perimeter With A Slope Of 3%. The Fencing Is Made Of Metal Structures, The Posts Are Made Of Pipes, The Fencing Panels Are Made Of Angles And Meshes N50-2.5. There Must Be A Killer Table Around The Perimeter., Acquisition Of A Cattle Burial Ground 1.8 Km From The Dolinsky Rural District. Description Of The Necessary Characteristics Of The Purchased Cattle Burial Ground. The Year Of Construction Of The Grave Is No Earlier Than 2025. The Total Area Of ​​The Cattle Burial Ground Should Be 32.5 Square Meters. M. The Cattle Burial Ground Should Have A Length Of 5.70 And A Width Of 5.70 Meters On The Outside, A Length Of 5.10 And A Width Of 5.10 And A Depth Of 3.6 Meters On The Inside. The Design Of The Tank Is Spatial. Strength And Stability Are Ensured By The Joint Work Of The Floor Slabs With The Longitudinal And Transverse Walls Of The Tank. The Foundations Are A Monolithic Reinforced Reinforced Concrete Slab 30 Cm Thick Made Of C16/20 Concrete. Under The Foundations, Preparation Is Made With A Thickness Of 100 Mm, Spilled With Bitumen. The Walls Of The Tank Are Foundation Blocks Fbs T. 24-3-6 Covering Slabs - A Reinforced Monolithic Reinforced Concrete Slab With A Hatch, 200 Mm Thick, Made Of C16 / 20 Concrete. The Unloading Tray Is Made Of Metal Structures. A Concrete Blind Area 1.0 M Wide Is Installed Along The Perimeter With A Slope Of 3%. The Fencing Is Made Of Metal Structures, The Posts Are Made Of Pipes, The Fencing Panels Are Made Of Angles And Meshes N50-2.5. There Must Be A Killer Table Around The Perimeter.