Request For Quotation Household Products For 2025

• Type: Cyanoacrylate (Second) Glue • Release Form: Tube / Bottle • Volume: 20–50 G (Specify Required) • Adhesion Time: 5–10 Seconds • Full Cure Time: 12–24 Hours • Temperature Stability: –20 °C … +80 °C • Adhesive Strength: High (Strength ≥ 10–15 Mpa) • Color: Transparent • Consumption: Economical • Durability: Moisture Resistant, Vibration Resistant • Smell: Characteristic, Volatile, • Diameter: 4.0 Mm • Length: 60 Mm • Material: Carbon Steel • Coating: Zinc (Yellow/White) • Spline Type: Ph2 Or Pz2 (Cross) • Thread Type: Full/Full Thread • Head Shape: Countersunk • Strength Class: Not Lower Than 4.8 • Corrosion Resistance: Complies With Gost 9.306-2003 • Compliance With Standards: Gost 1145-80, Gost 11473-75 Or Din 7997, Tool Length: / 180 Mm / • Material: High Carbon Tool Steel • Hardness Of The Working Part: Not Less Than Hrc 55–60 • Handles: Two-Component, Insulated, • Mechanism Type: Cylinder Or Lever • Housing Material: Steel (Galvanized Or Powder Coated) • Crossbar Type: Single Or Double Steel Crossbar • Tongue: Steel, Reversible • Center Distance: 72 Mm Or 85 Mm (Optional) • Backset (Offset): 50–60 Mm • Door Thickness: 30–50 Mm (Entrance Doors Can Be 40–70 Mm) • Face Plate Size: 20–25 Mm • Bar And Body Color: Chrome / Nickel / Bronze • Operating Life: At Least 100,000 Cycles • Temperature Range: –20 °C … +40 °C • Set Of Keys: 3–5 Pieces (If Cylinder Mechanism), • Control Type: Single-Valve (Crane-Box) • Working Medium: Cold Water • Operating Pressure: 0.05–0.6 Mpa (0.5–6 Bar) • Water Temperature: +5…+30 °C • Body Material: Chrome-Plated Brass (Or Stainless Steel - Specified As Necessary) • Valve Material: Brass/Ceramic Valve Axle • Connection Diameter: • G1/2” External Thread (Standard) • Aerator: Built-In, Anti-Vandal Or Standard • Swivel Spout: As Needed • Spout Length: 100–250 Mm, • Voltage Type: 220–240 V, 50 Hz • Maximum Power: • Unwound: Up To 3000–3500 W • When Wound: Up To 1000–1500 W • Cable Length: 20–40 Meters (Specify Actual) • Cable Cross-Section: 3×1.5 Mm² Or 3×2.5 Mm² (Depending On Load) • Cable Material: Stranded Copper • Degree Of Protection: Ip20–Ip44 (Ip44 Recommended For Outdoor Use) • Number Of Sockets: 1–4 Pcs. • Availability Of Grounding: Required • Thermal Protection: Built-In Automatic Thermal Fuse • Drum: Impact-Resistant Plastic Or Metal • Handle: For Carrying And Winding Cables • Operating Temperature: –25 °C To +40 °C, Blade Length 250–300 Mm Blade Width 180–220 Mm Blade Thickness 1.5–2.5 Mm Blade Shape Straight, Pointed Bottom Edge Handle Material Wood (Ash, Beech) / Composite / Metal Handle Length 900–1200 Mm Handle Type Straight Or D-Handle Total Tool Length 1100–1300 Mm, Length: 30 Cm • Connection Diameter: • Thread 1/2” – 1/2” (Standard) • Internal Or External Thread (Specify) • Operating Pressure: Up To 1.0 Mpa (10 Bar) • Burst Pressure: Not Less Than 5 Mpa • Operating Temperature: +5 °C To +90 °C • Braid Material: Stainless Steel • Inner Hose Material: Epdm (Food Grade, Temperature Resistant) • Fitting Material: Nickel-Plated Brass • Seals: Rubber Gaskets (Epdm) • Service Life: At Least 5 Years • Flexibility: High, Allows Multiple Bends • Degree Of Tightness: 100%, • Diameter: • External – 15 Mm • Internal - 12–13 Mm (Depending On The Type Of Material) • Connection Type: • For Soldering (For Ppr) • Compression (For Pex/Metal Plastic) • Threaded (External/Internal Thread 1/2”) • Material: • Polypropylene (Ppr) Or • Cross-Linked Polyethylene (Pex) Or • Combined Plastic + Brass Insert • Operating Pressure: Up To 10–20 Bar • Operating Temperature: • Cold Water: +5…+25 °C • Hot Water: Up To +70 °C • Short-Term: Up To +90–95 °C • Color: White / Gray / Green (By Manufacturer) • Service Life: At Least 25–50 Years • Corrosion Resistance: High, • Form: Aerosol • Cylinder Volume: 200 Ml • Base: Mineral Oil + Anti-Corrosion Additives • Cylinder Pressure: 4–7 Bar • Application Temperature Range: –50 °C … +120 °C • Properties: • Displaces Moisture • Protects Against Rust • Lubricates Moving Parts • Cleanses Dirt, Resins, Grease • Releases Soured/Stuck Bolts • Prevents Corrosion • Spray Nozzle: Long Dispenser Tube (Straw), • Material: Polypropylene (Ppr) • Connection Type: • On One Side - For Soldering (Socket) • On The Other - Thread (Internal Or External) • Diameters: • Solder Side: 15 / 20 / 25 / 32 Mm (Specify Required) • Threaded Side: 1/2”, 3/4”, 1” (To Be Specified Upon Request) • Operating Pressure: Up To 20 Bar • Operating Temperature: • Cold Water: +5…+25 °C • Hot Water: Up To +70 °C • Short-Term Up To +95 °C • Color: White / Gray / Green (Depending On Manufacturer) • Corrosion Resistance: High • Service Life: At Least 25–50 Years