Bids Are Invited For Acquisition Of Dental Equipment

Dental Autoclave 21 Liter Digital Autoclave, Automatic Aeration And Depressurization, Stainless Steel, Single Cycle, Heating 10 To 60 Minutes, Sterilization Pressure Of 1.7 To 1.9 Kgf/Cm2, Drying Time Of 40 Minutes 21 Liter Capacity, 1600 Watts Of Power, Gross Weight Up To 26Kg, Frequency 50 To 60 Hz, Drying With Half-Open Door, Automatic Bivolt (110/220V) 2-Year Warranty By The Manufacturer, Chamber Capacity Using Trays Of 12 Desterilization Envelopes (10/23Cm), Equipment With Anvisa And Ministry Of Health Registration, Dental Chair On Base Solid Steel Base Made Of Solid Steel, Resistant And Heavy Enough To Support Itself Without Fixing It To The Floor, Without Any Vibration Effects, Oscillation Or Imbalance In The Chair; Bottom Part Protected Against Cleaning Agents And Water, With Insulation By Blanket Or Non-Slip Rubber Lining With Piping Finish; Base And Seat And Back Structures Painted With Electrostatic Paint (White); Plastic Parts In Injected Abs; Control To Raise And Lower The Seat And Back; Buttons For Movements: Pt/Vz (Working Position/Return To Zero), Fully Automatic, Synchronized Vz, Pt With At Least Three Positions Programmable By The Professional, All With Return To The Last Position, With Synchronized Tilting And Lifting Movements And Stopping Of Automatic Movements At The Touch Of Any Command; Pantograph-Type Movement System, With Lifting Capacity Of At Least 200 Kg, Movement Of The Seat And Backrest Is Driven By Two Low-Voltage, Oil-Free Electric Gearmotors, Central Articulation Between Seat And Backrest; Steel Backrest; Two Support Arms, One Fixed And The Other With Lateral Opening Or Folding Upwards, Made Of Metal Structure With Coating To Protect Against The Effects Of Corrosion During Hygiene Procedures, Bi-Articulated Headrest With Longitudinal Movement And Lever Lock, Enveloping And Anatomical Upholstery, Allowing Comfort And Stability To The Patient, Without Seams, Minimum Backrest Width 650Mm; Maximum Backrest Height: 1850Mm; Maximum Seat Height: Min. 850Mm Minimum Seat Height: Min. 450Mm. Equipment: Attached To The Office; Articulated Arm With Vertical And Horizontal Mobility With Pneumatic Locking; Emaco Stainless Tray; Handles On The Body Of The Equipment;Individual Tip Terminal With Selection By Pneumatic System Through A Trigger Block For At Least Three Handpieces, Being A Triple Syringe And Two Borden Type Terminals (One For High And One For Low Rotation) With Dental Contra-Angle Made Of Metallic Body (Anodized Aluminum Or Steel); Rotation Speed 20,000 Rpm;Low Noise Level (Maximum Noise Level: Up To 70 Decibels); Intra Hitch System; With Spray;Push Button (No Need For Drill Bits);Autoclavable At 135Gc.Equipment Must Be Manufactured And Delivered As Required By Current Legislation;Registration With Ms/Anvisa/Inmetro Certification;Manual In Portuguese, High Rotation Dental Pen Low Noise Level; Autoclavable At 135Gc;Push Button (No Need For A Drill Bit);Presentation Of The Body In Steel Or Anodized Aluminum; Ceramic Bearing, Turbine With Balancing; Rotation Up To Min.400,000 Rpm, Triple Spray, Borden Type Connection (02 Holes). Must Come With: Spray Unclogging Needle And Connection Sealing Rubber. The Equipment Must Be Manufactured And Delivered As Required By Current Legislation At Publication Of The Edit