Bids Are Invited For Acquisition Of School Furniture For School Units In The Municipal Education Network Of Anahy-Pr, According To Specifications Contained In Annex I.
Bids Are Invited For Acquisition Of School Furniture For School Units In The Municipal Education Network Of Anahy-Pr, According To Specifications Contained In Annex I.
Maternity Meal Table 04 Seats Seat And Back In Plastic Resin With Swivel Chair Support Table With Top Made Of 18 Mm Thick Mdf, Covered On The Top Surface In Low Pressure Melamine Laminate In Gray Color. Longitudinal Edges Finished In Ergosoft Pvc, Post-Forming Type 180º, Colorful Flexible. Rounded Top Shape Corner Model Measuring Measurements: 1720 Metallic Parts Joined By Mig Welding, Finishing On The Feet With Boot-Type Tips On The Lower Ends And Two Spike-Type Finishing Tips On The Upper Part Of The Seat, All In The Same Colors As The Seats And Backrests. Seat And Back Are Hole-Free (Only In The Belt Coupling Slot), Made Of Virgin Colored Thermoplastic Copolymer Resin Injected Under Pressure With Antibacterial Additive. Seat And Back With Three Reinforcing Ribs And Anti-Slip Grooves With Double Anatomy With Fitting For The Buttocks And Thighs In Order To Provide Comfort To The User, Fixed To The Metal Structure Using Four Type Screws. Phillips. Backrest With Double Anatomy With Three Reinforcement Ribs, Fixing The Backrest To The Metal Structure Through A 7/8 Round Channel Fitting And Two Pop Type Aluminum Rivets On The Back Of The Backrest. Each Span Should Contain A Chair With A Seat And Back Made Of Colored Plastic Resin. Each Seat Must Contain A Belt With Five Points, Made Of Nylon Laces, Allowing The Child To Remain Correctly Accommodated And Secured In The Chair. Chair Support Structure Made Of Industrial Steel Tube Atc 1010/1020, With A Rectangular Section 16X30, With A Thickness Of 1.50 Mm. It Has An Anti-Slip Safety Locking Bar On Each Seat, Which Is Made Of 7/8 Tube And Fixed..., Meal Table 03 Maternity Places Plastic Resin With Support Swivel Chairtable With Top Made Of Multilaminated Mdf Wood 18 Mm Thick, Coated On The Top Side In Low Pressure Melamine Laminate In Egg Color. Longitudinal Edges Finished In Ergosoft Pvc, Post Forming Type 180º, Colorful Flexible. Top Shape Rounded Rectangular Model Measuring 1700 X 750 Mm. With 03 Seats With Backrests Made Of Metallic Structure Made Of 7/8 Tube 16 Plate (1.5 Mm) Metal Treated Against Rust With Zinc Phosphate Phosphating Agent, Epoxy (Powder) Painting In Beige Color, All In The Same Colors As The Seats And Backrests. Seat And Backrest Free Of Holes (Only The One For The Seat Belt), In Virgin Thermoplastic Copolymer Resin Injected Under Pressure With Antibacterial Additive. Seat With Four Reinforcement Ribs And Anti-Slip Grooves With Double Anatomy With Fitting For The Buttocks And Thighs In Order To Provide Comfort To The User, Fixed To The Metal Structure Through Four Phillips Type Screws. Backrest With Double Anatomy With Four Reinforcement Ribs, Fixing The Backrest To The Metal Structure Through A 7/8 Round Channel Fitting And Four Pop Type Aluminum Rivets On The Back. Each Span Must Contain A Chair With A Seat And Back Made Of Plastic Resin. Each Seat Must Contain A Belt With Five Points, 1.50 Mm Thick. Submit Obligator
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
