Protective Ear Muffler/Safety Hearing Muffler Shell Type, In One Size And With Wide Adjustment/Stem Height Adjustment, With A Reduction Level Of 23 Db (Nrrsf), Consisting Of 2 Shells In Polystyrene Plastic With A Surface Resistant To Oily Products, With A Polyurethane Foam Contact Pad On The Sides And Interior Of The Shell, With A Stem Above The Padded Rigid Plastic Head And A Movable Fixing Rod With Foldable Head, To Keep The Shells Firmly Attached To The Users Ear Region., Plastic Basin White Plastic Basin, With 15Cm X 4Cm (Dxa), Leather Boot Safety Boot With Electrical And Mechanical Protection; Made Of Leather; No Metallic Components; Meets Nr 10; With Lightweight And Ultra-Resistant Composite Toe Cap; Elastic Closure On The Sides. Mounting Insole In Resin Polyester And Insulating Outsole In Injected Biodensity Pu. If Possible Directly On The Upper., Drum For Transporting Snakes Drum For Transporting Snakes Drum For Transporting Snakes, Hdpe Plastic Material, Measures 32X32x29., Animal Trap Aluminum Drum - Veterinary Retractable Drum. Features: Galvanized. Steel Cable With Double Coating To Avoid Hurting The Animal. Anti-Slip Grips. Retractable. In Accordance With Inmetro And With The Recommendations Contained In The Abnt Standards, Where Appropriate, 25/11/2025 - 14:24:20, “Hooks” For Handling Snakes Broomstick-Type Naval Plywood Rod, Round, 2.5 Cm In Diameter, 1.2 Meters Long, With A Fixed Tip At The End Piece Of Iron (4 To 5 Mm In Diameter) In “L” Shape Measuring 6.0Cm Works With 3 Aaa Batteries; It Has 9 Tilt Adjustments And 3 Brightness Stages, With High, Low And Intermittent Light (Flashing); Material: Plastic; Bulb Type: Cob Led; Luminous Flux Power: 120 Lumens; Waterproof;, Larva Fishing Larva Fishing Made Of Wire Covered With Green Plastic And 28 Cm Cable And Puçá In The Following Size: 10.5 Cm X 09 Cm Width Sprayers, Intended For Use In The Fight Against Vectors, Must Meet The Following Technical Specifications: Chemical Tank Made Of White, High-Density Translucent Polyethylene With An Additive Against Uv Rays, And With An Average Thickness Of 3.0 Millimeters. Built-In Handle. Volumetric Capacity Between 11 And 13 Liters. Volumetric Graduation Arranged With Measurements In Liters (Liter Per Liter). Chemical Tank Lid: Screwable Type, And With Breather Valve. Internal Part Containing Insecticide Doser With Volumetric Capacity Between 50 And 150 Milliliters (Item Necessary For Volumetric Quantification Of The Insecticides Used). Filler Nozzle Filter: Made Of Plastic Or Metallic Material, And With Mesh Between 0.4 And 0.8 Millimeters. Chassis: Made Of Reinforced Plastic, Resistant To Corrosion, Knocks And Falls. Average Thickness 3.0 Millimeters. Discharge Set: Made Of Plastic Or Metal Material, With A Length Between 50 And 65 Centimeters. Line Filter With Mesh Between 0.3 And 0.6 Mm Inside Its Cable. Flat Fan Spray Tip (02F80), And With Flow Between 0.6 And 0.75 L/Min, At Pressures And
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
