Bids Are Invited For Hiring A Specialized Engineering Company To Supply Materials And Labor For The Construction Of The Sports And Recreation Center

Labor - Construction Administration (According To Tcu - 3.49% To 8.87%), Labor - Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, Labor - M²xmeslocation Of Metallic Facade Type Scaffolding, Pieces Approximately 1.20 M Wide And 2.0 M High, Including Diagonals In Modular Facade, With Metallic Floor, For Buildings With Multiple Floors (Excluding Scaffolding And Cleaning). Af_03/2024, Labor - Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, 10/11/2025 - 16:19:14, Labor - Ballast With Granular Material, Applied On Crowning Blocks, Thickness Of *10 Cm*. Af_01/2024, Labor - Manufacture, Assembly And Disassembly Of Formwork For Crowning Block, Made Of Resin Plywood Sheet, E=17 Mm, 4 Uses. Af_01/2024, Labor - Block Frame Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Labor - Block Frame, Insulated Footing, Baldrame Beam And Running Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_01/2024, Labor - Block Frame Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 16 Mm Ca-50 Steel - Assembly. Af_01/2024, Labor - Concreting A Crowning Block Or Baldrame Beam, Fck 30 Mpa, Using A Pump - Laying, Thinning And Finishing. Af_01/2024, Labor - Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Labor - Assembly And Disassembly Of Rectangular Pillar Formwork And Similar Structures, Double Right Foot, Made Of Plasticized Plywood Sheet, 10 Uses. Af_09/2020, Labor - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 16.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Labor - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Labor - Concreting Beams/Pillars, Fck=30 Mpa, Densification And Finishing. (Ref. Sinapi 103674), Labor - Installation Of Pre-Molded Pillars, For Heights Greater Than Or Equal To 8.0 M And Less Than 10.0 M, Including Lifting. (Ref. Sinapi 92257), Labor - Assembly And Disassembly Of Pre-Molded Beam Formwork, Made From Plasticized Wood Sheet, 18 Uses. Af_09/2020, Labor - Frame Of Pillar Or Beam Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 10, Labor - Frame Of Pillar Or Beam Of Conventional Structure Of Reinforced Concrete Using Steel Of Ca-50 Of 8, Labor - Frame Of Pillar Or Beam Of Conventional Structure Of Reinforced Concrete Using Steel Of Ca-60 Of 5, For Spans Greater Than Or Equal To 6.0 M And Smaller Than 8, Including Lifting. (Ref. Sinapi 92256), For Spans Greater Than Or Equal To 3.0 M And Smaller Than 6, Including Lifting. (Ref. Sinapi 92255), Labor - Reinforcement Of The Concrete Wall System, Executed As Positive Reinforcement Of Slabs, Screen Q-138. Af_12/2024, Labor - Ballast With Granular Material (Crushed Stone N.1 And Crushed Stone N.2), Applied To Floors Or Slabs On Ground, Labor - Separation Layer For Execution Of Radier, Concrete Floor Or Slab On Ground, In Plastic Tarpaulin. Af_09/2021, Labor - Frame For Execution Of Radier, Using T