Refurbishment Service For Student Set Cja-01 - Specification: Set For Student Size 1, With The Height Of The Student Being Between 0.93 And 1.16M, Consisting Of A Table And A Chair, Top In Injected Plastic With Application Of Melamine Laminate On The Upper Face, Equipped With A Structural Cross Member Injected In Technical Plastic, Mounted On A Tubular Steel Structure. Approximate Dimensions: 600 336 X 168 Mm (Wx). Note: The Service Involves: Welding, Sanding And Painting Of Steel Structures; Table Top Replacement; Replacing Table Shoes; Replacement Of Seats And Backs Of Chairs., Refurbishment Service For Student Collective Set Cjc-01- Specification: With Replacement Of The Top In Mdp Or Mdf, With A Thickness Of 18Mm, Covered On The Upper Face In High Pressure Melamine Laminate, 0.8Mm Thick, Textured Finish, In Gray Color, Rounded Corners. Virgin, Free Of Mineral Fillers, Injected In Orange Color. Application Of Claw Nuts With Metric M6 Thread And 10 Mm Length. Tips And Shoes In Polypropylene. Chair With Seat And Back In Polypropylene, In Orange Color. Structure In Cold Rolled Carbon Steel Tube, With Seam, Diameter Of 20.7Mm, In Plate 14 (1.9Mm). Note: The Service Involves: Welding, Sanding And Painting Of Steel Structures Replacement/Refurbishment Of Table Tops Replacement Of Table Tops And Shoes Replacement Of Seats And Backs Of Chairs., Refurbishment Service For Student Set Cja-03- Specification: Set For Student Size 3, With The Students Height Being Between 1, 19 And 1. 42M, Injected Plastic Top With Melamine Laminate Application On The Top Side, Mounted On A Tubular Steel Structure, Containing Injected Plastic Book Holders. Approximate Dimensions: 600 Table Top Replacement/Renovation; Replacing Table Tips And Shoes; Replacement Of Seats And Backs Of Chairs., Refurbishment Service For Student Set Cja-04- Specification: Table With Top Made Of Abs, Virgin, Injected In Red, Equipped With Nuts With Flange Or Recess, With M6 Metric Thread, Coin-Injected And Structural Cross Member In Nylon 6.0 (Polyamide) Added With Fiberglass, Injected In Color Black. Chair With Seat And Back In Virgin Polypropylene Copolymer, Injected, In Red. Structure In Cold Rolled Carbon Steel Tube, 9Mm). Attachment Of The Injected Seat And Back To The Structure Using Recessed Rivets, Diameter 4.8Mm, Length 12Mm. Shoes / Tips In Virgin Polypropylene Copolymer. Note: The Service Involves: Welding, Sanding And Painting Of Steel Structures; Replacement/Renovation Of Table Tops; Replacement Of Table Tips And Shoes Replacement Of Chair Seats And Backs., Student Set Refurbishment Service Cja-06- Specification: Table With Abs Top, Free Of Mineral Fillers, Injected In Blue; Vertical Uprights And Longitudinal Cross Member Made Of Cold-Rolled Carbon Steel Tube, Cm Seam, Long Section Of 29Mm X 58, In Sheet 16 (1.5Mm); Upper Beam Made Of Carbon Steel Tube Laminated To A
