Tenders Are Invited For Ensuring Continuity Of Supply Of Basic Services, Including Supplementing Resources In The Szydłowiec District By Purchasing A Backhoe Loader With Work Equipment

The Backhoe Loader Must Meet The Following Requirements:1. Brand New Machine.2. Year Of Production Not Older Than January 20243. Wheeled Machine.4. Operating Weight Minimum 9100Kg, Maximum 10000Kg.5. The Height From The Ground To The Upper Edge Of The Operators Cabin Is A Maximum Of 3100Mm.6. The Total Width Of The Backhoe Loader Measured Without The Front Bucket, Minimum 2290Mm, Maximum 2550Mm.7. Wheelbase Minimum 2000Mm Maximum 2300Mm.8. Diesel Engine With At Least Four Cylinders.9. Rated Engine Power Minimum 80Kw (According To Iso 14396).10. Engine Torque Minimum 450Nm.11. Engine Displacement Minimum 3600 Cm3.12. Exhaust Emissions According To The Eu Standard Minimum Stage V.13. Automatic Gearbox, Minimum 4-Speed Forward And Minimum 3-Speed Reverse.14. The Forward Speed Of The Backhoe Loader Is At Least 40 Km/H And The Reverse Speed Is At Least 27 Km/H.15. Limited Slip Differential Or 100% Rear Axle Lock.16. Selecting The Driving Direction Using An Electric Switch On The Steering Column Or Joystick.17. Bridges Equipped With Planetary Final Drives With Proportional Torque Distribution.18. Steering System With The Ability To Operate In 3 Control Modes: Front Wheel Control Mode, All Wheel Control Mode In The Same Direction, Diagonal Control Of The Front And Rear Wheels In Different Directions (Crab Mode).19. Steering System Equipped With Hydraulic Assistance.20. Dual Circuit Braking System.21. Braking System Operating On All 4 Wheels.22. Disc Service Brakes, Wet.23. Variable Displacement Multi-Piston Pump.24. Oil Flow Minimum 160L/Min25. Working Pressure Minimum 200 Bar.26. Vertical Stabilizing Supports, Independent, Hydraulically Extendable.27. General Purpose Tires.28. Four Equal Wheels, Size R28.29. Front And Rear Wheel Mudguards.30. Controlling The Loader Arms With A Joystick.31. Loader Bucket Stabilization System.32. Automatic Arm Cushioning System.33. Return To Digging System.34. The Height From The Ground To The Loader Bucket Pivot Pin Is Minimum 3450Mm.35. Ability To Lift Loads To Full Height With A Minimum Weight Of 3,500 Kg.36. The Breaking Force Of The Loader Arms Is At Least 4300Dan.37. The Breaking Force Of The Loader Bucket Is At Least 5200Dan.38. The Capacity Of The Loader Bucket Is At Least 1.15 M3.39. The Width Of The Loader Bucket Is At Least 2200Mm.40. Split Loader Bucket With Teeth - Opens, Allowing Pushing, Loading, Digging, Grabbing, Spreading And Leveling, Equipped With Pallet Forks Mounted On The Bucket.41. Controlling The Excavator Arm Using Joysticks.42. Telescopic Excavator Arm, Extension Of The Inner Part Of The Arm, With The Possibility Of Side Shifting, Equipped With A Quick Coupler.43. Arm Rotation Angle Minimum 180 Degrees.44. Digging Depth Minimum 5700Mm.45. Digging Bucket, 300Mm Wide.46. Digging Bucket, 600Mm Wide.47. Grading Bucket, 1500Mm Wide.48. Operators Cabin Meets Rops/Fops.49 Safety Standards. Cabin Equipped With Heating And Air Conditioning.50. Noise Level In The Cabin Maximum 74Db(A).51. Pneumatic Opera