Request For Quotation Purchasing Equipment For The Laboratory

Lamp For Working With A Soldering Iron - Lamp With Led Panel 1. 2 Pcs. 2. Power Of At Least 24W. 3. Material Metal, Plastic, Abs Plastic. 4. Mechanical Switch Type. 5. Brightness Adjustment Available. 6. Brightness Up To 2000 Lumens. -Spring Hinge Bracket 1. 3Pcs. -Desk Clamp 1. 3Pcs. -Power Cord With Switch 1. 3Pcs. -Operating Instructions 1. 3Pcs., Special Workbench, Metal - Workbench 1. 1 Pc. 2. Dimensions (Height × Width × Depth) No Less Than ≈866 × 1200 × 700 Mm. 3. The Maximum Load On The Workbench Is At Least ~1000 Kg. 4. Colors And Coating Body Gray (Ral 7038) + Facades / Elements – Blue (Ral 5002); Coating - Powder Paint. -Tabletop 1. 1Pc. 2. At Least Mdf ~24 Mm Thick + Galvanized Metal Sheet 1.2-1.5 Mm On Top. 3. The Maximum Load On The Tabletop Is About 300 Kg Of Distributed Load. - Cabinet Wd 2 1. 1 Pc. 2. The Load On The Box Is At Least 30 Kg. -Support Wf 1 1. 1Pc. -Shelf And Wall Wsh 120/1 1. 1 Pc. -Perforated Screen Ws 120 1. 1Pc. -Led Lighting 1. 1Pc. -Tool Accessories 1. 1Pc. -Documentation 1. 1 Piece. -User Manual 1. 1Pc., Power Supply (Servo Tester) - Servo Tester Hj 1-4 1. 2 Pcs. 2. Supply Voltage Dc 4.8–6 V. 3. Output Signal Pulse Width 800–2200 Μs. 4. Operating Modes S-1 - Manual Mode, S-2 - Neutral Position, S-3 - Automatic Mode. -Connection Cables 1. 2Pcs. -User Manual 1. 2Pcs., Led Headlamp. -Headlamp 1. 2 Pcs. 2. Brightness Of At Least 1000 Lumens. 3. Brightness (Medium Mode) At Least 300-500 Lumens. 4. Long Beam Up To 150-200 Meters. 5. Composition Of Cree Xp L / Xm L / Similar Premium Leds. 6. Power Type Li-Ion Battery Or Replaceable Aaa Batteries × 3. 7. Operating Time At Least At Maximum ~2-3 Hours, In Economy Mode ~10-20 Hours. 8. Lighting Modes Minimum: High / Medium / Low / Strobe / Sos / Red Light. 9. Usb-C Charging. 10. Protection Degree Ipx6-Ipx8. 11. Shock Resistance Can Withstand Falls From A Height Of ~1-2 Meters. -Adjustable Forehead Strap 1. 2Pcs. - Fastenings 1. 2Kt. -Batteries 1. 2Kt. -Charging Cable 1. 2Pcs. -Additional Fasteners 1. 2 Pcs. -Operating Instructions 1. 2Pcs., Workbench Table For Milling Machine And Lathe -Workbench Table For Milling Machine And Lathe 1. 2 Pcs. 2. Maximum Load Not Less Than 600 Kg. -Tabletop 1. 2 Pcs. 2. Material: 5 Mm Painted Steel Plate. -Frame 1. 2 Pcs. 2. Profile Pipe 60X60 Mm. -Legs 1. 8Pcs. 2. Height Adjustable, With Polyamide Supports To Compensate For Uneven Floors. -Shelf 1. 2 Pcs. 2. Bottom Perforated Shelf With Reinforcement, Made Of Galvanized Steel. - Thrust Bearings 1. 8 Pcs. 2. Anti-Vibration Support Function. - Fasteners 1. 2Kt. -Assembly Instructions 1. 2Pcs., Charging Station - Portable Charging Station 1. 1Pc. 2. Capacity/Energy Reserve Of At Least 1024Wh. 3. Output Power (Ac) 1800W Constant Power. 4. Peak/Pulse Power Up To 3600W With X-Boost Function. 5. X-Boost Support For Automatic Power Increase Up To 2400W. 6. Input (Charging) Ac At Least 1500 W. 7. Input (Solar) At Least 11–60V, Up To 500W. 8. Usb A Output At Least 2 Ports, Up To 18W Each. 9. Usb C Output At Least 2 Ports, Up To 100W Each. 10. Output 12.6V (Dc / Car) At Least 1 Port - 12.6V, Up To 10A (≈126W). 11. Output Dc5521 At Least 2 Ports - 12.6V, Up To 3A Each. 12. Lifepo₄ (Lfp) Battery Chemistry. 13. Battery Pack Protection Level: Ip65 (From Splashes And Dust). -Ac Power Cable 1. 1Pc. -Cable For Charging From Car Cigarette Lighter 1. 1Pc. -Cable Dc5521 → Dc5525 1. 1 Set. -Instructions, Warranty Card 1. 1 Piece. -Warranty Card 1. 1 Piece., -Soldering Station 1. 1Pc. 2. Power Of At Least 160 W. 3. Supply Voltage Not Less Than Ac 100-240 V, 50-60 Hz. 4. Temperature Range Of At Least 100-450°C, Adjustable In 1°C Steps. 5. Compatible Handles/Attachments C115 (Included), C210, C245. 6. Potential Between Tip And Ground <2 Mv. 7. Digital Temperature Control Using Buttons. 8. Temperature Display Led Display Shows The Set And Current Temperature. 9. Number Of Programmable Channels Of The Settings Memory Channel. 10. Resistance Between Tip And Ground <2 Ohm. -Control Unit 1. 1Pc. - Soldering Pen/Flask 1. 1 Pc. -Replaceable Tips 1. 3 Pcs. -Sponge Or Mesh For Cleaning The Tip 1. 1 Pc. -Copper Tip Cleaner (Copper Web) 1. 1Pc. -Power Cord 1. 1Pc. - Cabinet 1. 1 Pc. - Stand Holder For Soldering Pen 1. 1Pc. -Monitor 1. 1Pc. -Metal Wire/Cable Holder 1. 1Pc. -Packaging For Transportation 1. 1Pc. -User Manual 1. 1Pc., Transport Backpack/Case. -Transport Backpack/Case For Carrying Fpv Kits. 1. 29 Pcs. 2. Volume (Capacity) More Than 35 Liters With The Capacity Of Five 13-Inch Drones. 3. Empty Weight From 2.5 To 3 Kg. 4. Internal Dimensions From Width 45 Cm Length 45 Cm. 5. Materials Dense Nylon 1200D (External), Polyester 210D Or Similar (Internal). 6. Waterproof/Rain Cover Available. 7. Dividers/Partitions Approximately 25–35 Cm × 20–25 Cm × 10–15 Cm. 8. Opening Type “Clamshell” Opening (Fully Opens, Double Zipper) Or Standard Backpack With Lid On Top And Side Pockets. - Protective Soft Or Hard Liners/Partitions. 1. 29 Pcs. - Pockets And Compartments For Small Accessories. 1. 29 Pcs. - Locks Or Latches. 1. 29 Pcs. - Compartment Or Pocket For The Charger (Or Charging Station). 1. 29 Pcs. - Compartment/Straps For Remote Control. 1. 29 Pcs. - Compartment For Fpv Goggles/Helmet. 1. 29 Pcs. - Rain Cover/Waterproof Cover. 1. 29 Pcs. - Top Handle, Possibly Side Handle, And Comfortable Shoulder Straps. 1. 29 Pcs. - Organizer For Small Items. 1. 29 Pcs., Set Of Electric Screwdrivers - Cordless Screwdriver 1. 2 Pcs. 2. Battery Voltage Is At Least 4V. 3. Battery Capacity Is At Least 2Ah. 4. Maximum Torque Not Less Than 5Nm. 5. Soft Torque Of At Least 2.5Nm. 6. Idle Speed Of At Least 300 Rpm. 7. Charging Time Is At Least 85 Minutes. 8. There Is A Reverse. 9. Motor Type Is Brushed. -Set Of Bits 1. 2 Pcs. -Bit Holder / Extension 1. 2 Pcs. -Case / Package 1. 2 Pcs. -Magnetic Adapter For Bits 1. 2Pcs. -Hook/Extension For Hard-To-Reach Places 1. 2 Pcs. - Charger With Adapter 1. 2 Pcs. -Operating Instructions 1. 2Pcs. - Cordless Screwdriver 1. 2 Pcs. 2. Battery Voltage Is At Least 3.7V. 3. Battery Capacity Is At Least 1500 Mah. 4. Maximum Torque Not Less Than 3Nm. 5. Soft Torque Of At Least 2.5Nm. 6. Idle Speed Of At Least 300 Rpm. 7. Charging Time Is At Least 3 Hours. 8. There Is A Reverse. 9. Motor Type Is Brushed. -Set Of Bits 1. 2 Pcs. -Bit Holder / Extension 1. 2 Pcs. -Case / Package 1. 2 Pcs. -Magnetic Adapter For Bits 1. 2Pcs. - Charger With Adapter 1. 2 Pcs. -Operating Instructions 1. 2Pcs., Wiring Table 1. 1Pc. 2. Parameters (W*D*H) No Less Than 1500 × 750 × 1800 Mm. 3. Maximum Load Not Less Than 550 Kg. -Tabletop 1. 1Pc. 2. The Tabletop Material Is Plywood Of At Least 24 Mm With A 4 Mm Textolite Overlay. -Frame 1. 1Pc. 2. The Material Is Metal, Welded, Powder Coated. -Legs 1. 1Pc. 2. Height Adjustable. -Shelves 1. 3 Pcs. 2. Protective Screen With Shelves And Hinged Doors With A Lock. -Power Supply 1. 1Pc. 2. 2 Sockets With 5 Plugs Installed On A Protective Screen. -Lighting 1. 1Pc. 2. Fluorescent Lamp. - Cabinet 1. 1 Pc. 2. With A Hinged Door With A Lock And Internal Shelves. -User Manual 1. 1Pc.