Request For Quotation Purchasing A Filter For Purifying Cold Drinking Water

Vontron Brand Ulp21-4040 Filter Pump Spare Part Is Used In Ultra-Low Pressure Reverse Osmosis Filters.Ulp Series Of Ultra-Low Pressure Membranes Made Of Aromatic Polyamide Compound, Can Operate At Ultra-Low Pressure, Achieving As High Permeate Flux And Salt Rejection As Possible For Low Pressure Membranes, It Is Applicable To Surface Water And Groundwater Desalination. It Operates At Approximately 2/3 The Operating Pressure Of A Regular Low Pressure Composite Membrane, And Achieves Salt Rejection Rates Of Up To 99.5%. The Membrane Element Purifies Water From Most Of The Various Impurities Contained In Them (Organic Substances, Dissolved Salts, Microorganisms, Suspended And Colloidal Substances, Bacteria, Viruses). Used For Desalination Of Surface, Groundwater And Tap Water. Also Used In Commercial And Industrial Systems For The Preparation Of Drinking Water, The Preparation Of Feed Water For Boiler Houses, In Food Production And Other Purposes. The Membrane Element Is Made On The Basis Of Aromatic Polyamide Of The Ulp Series. Working Pressure, Atm - 10 Productivity, M3/Day - 9.1 Selectivity, (Desalting) % - 99 Min. Selectivity, % - 98.5 Surface Area, M2 - 85(7.9) Pressure - 150 Psi (1.03Mpa) Solution Temperature - 25 Oc Solution Concentration (Nacl) - 1500Ppm Ph Value Of The Solution - 7.5 Recovery Rate Of One Membrane Element - 15% Max. Working Pressure - 600Psi (4.14Mpa) Max. Inlet Flow - 75Gpm (17 M3/H) (8040-Size) 16Gpm (3.6 M3/H) (4040 And 4021) 6.0Gpm (1.4 M3/H) (2521 And 2540) Max. Inlet Temperature - 45 Oc Max. Sdi Input - 5 Residual Chlorine Concentration Of Incoming Water <0.1 Ppm Ph Range Of Incoming Water During Continuous Operation - 3-10 Ph Range Of Incoming Water For Chemical Treatment 2-12 Max. Pressure Drop Per Membrane Element - 15Psi (0.1 Mpa)