Request For Quotation Electronic Pressure Meter, Combustion Alarm, Ivn, Flame Combustion Device

Sensitivity At Frequency F, No Worse: F = 10 Hz F = 15 Hz- 1.5 Mv 2.0 Mv Line Length Sensor - Signaling Device - < 200 M Response Time For Presence/Absence Of Pilot Or Burner Flame - < 2 S Line Frequency Noise Suppression 50 Hz->200 Mv Supply Voltage: Backup Power: -~220±22V 50 Hz =24 V Permissible Loads On Alarm Output Circuits: - Ac 220V, 50Hz - Direct Current = 30V- 0.01 - 2.0 A 0.01 - 2.0A Rated Power Consumption Backup Power - 5 Va 3 W Device Weight, No More Than 0.6 Kg Operating Mode: Continuous Degree Of Protection Of The Alarm According To Gost 14254-Ip50 Signaling Device Luch-1Am Wall-Mounted “N” Version. 033. Wall-Mounted Version In A Housing Type N-1973 For Monitoring The Presence Of A Pilot Torch Or Burner, Or The Main Torch In The Furnaces Of Boiler Units. It Is Used In Sets Of Ignition-Protective Devices (Ipd) And Ignition-Signaling Devices (Zsu-Pi) Or As An Independent Device For Monitoring The Combustion Of Process Plant Flares. The Luch-1Am Combustion Alarm Can Be Used As Part Of Existing And Designed Boiler Automation Protection Systems As Part Of Ignition-Protective Devices In Accordance With Gost R 52229-2004 And Burners Gost 21204-97. Works In Conjunction With An Ionization Ignition Sensor (Electrode), An Infrared Radiation Photosensor Fd-02, A Combined Infrared And Ultraviolet Photosensor Type Fd-05Gm, A Selective Burner Control Device Type Uskf-I And A Control Electrode Type Ke., Electronic Pressure Meter Pd150-Dv 6.0K-899-0.5-1-R. - Dc Supply Voltage – 20…60V (Rated Voltage 24V), Ac Supply Voltage – 90…264V (Rated Value 220V), Frequency From 47 To 63 Hz; - Power Consumption – 7.0 Va; - Range Of Measured Pressure – From 0 To 6 Kpa; - Accuracy Class – 0.5 From Full Scale Value; - Between Verification Interval – 5 Years; - Period For Updating Measurement Results – No More Than 0.2 Seconds; - Discrete Outputs – 2 Pcs; - Type Of Discrete Outputs – Electromagnetic Relay; - Maximum Switching Voltage – Alternating – 250V, Direct – 30V; - Maximum Switching Current – ​​Alternating – 5A, Direct – 10A; - Type Of Output Analog Signal – 4..20Ma; - Analog Signal Connection Diagram – Two-Wire Current Loop; - Type Of Connecting Fitting – “Herringbone” Fitting For A Tube With An Internal Diameter Of 4-7 Mm; - Overall Dimensions – 105X137x65 Mm; - Device Weight – No More Than 0.4 Kg; - Housing Protection Degree – Ip54; - Warranty Period – 2 Years; - Average Service Life – At Least 12 Years, Accuracy Class 0.5., For Spark Ignition Of Gas, Diesel, Oil Burners Of Boiler Units. Nutrition 220/50. Updated Version Of Ivn-Tr. Ivn-Tr-M Is An Inverter Type, Creates A Powerful, Stable Spark At Temperatures From Minus 60°C And At The Same Time Provides A Low Level Of Interference. Purpose The High Voltage Source Ivn-Tr-M (Hereinafter Referred To As Ivn) Is Intended For Spark Ignition Of Gas And Liquid Fuel Burners Of Boiler Units, Technological Installations, Furnaces, And Boilers. Specifications Supply Voltage - From 220 To 230 V Network Frequency - From 50 To 60 Hz Rated Current - 1 A Output Voltage - 8 Kv Secondary Winding Current In Short Circuit Mode - 30 Ma The Duration Of One Switch-On When Igniting A Combustible Mixture Is No More Than 45 S, With A Switch-On Frequency Of At Least 2 Minutes Recommended Spark Gap Is 3 To 4 Mm The Maximum Length Of A High Voltage Wire Is With A Distributed Resistance Of 2.5 M, A Pvv-1 Wire With A Copper Core Or An Analogue No More Than 30 M Ambient Temperature - From Minus 60 To Plus 60 Oc Degree Of Protection According To Gost 14254-Ip54 Weight - No More Than 2 Kg Total Average Service Life Is At Least 10 Years Information About Precious Materials - Does Not Contain Completeness The Package Includes: High Voltage Source Ivn-Tr-M Power Cable - 1 M (0.35-2.5 M – Upon Request) High Voltage Wire 1M (0.75M, 1.5M, 2M, 2.5M) Passport A103.500.000.000-02 Ps Compliance Tr Ts 004/2011 On The Safety Of Low-Voltage Equipment Tr Cu 020/2011 Electromagnetic Compatibility Of Technical Equipment