Bids Are Invited For Acquisition Of School Furniture For The Education Office Of The Municipality Of São João Do Cariri - Pb

Childrens Shell Rectangular Student Set Composition: Table And Chair. Chair: Approximate Dimensions: Height: 600 Mm, Width: 456 Mm, Depth: 410 Mm Height From Seat To Floor: 359 Mm. Structure: Made From Engineering Thermoplastic (Polypropylene Copolymer) With Glass Fiber Additives, Free From Toxic Elements. Monoblock Constructive Concept. The Lower Ends Of The Feet Receive Shoes, Made Of Rsn Hytrel. Table: Approximate Dimensions: Height: 590 Mm, Width: 621 Mm Depth: 488 Mm Structure: Made Of 1010/1020 Steel Tubes, Top Base In 20 X 20 Mm Square Tube With 1.9 Mm Thickness, Welded To Two 29 58 Mm With A Wall Thickness Of 1.5 Mm, Joined Together By An Oblong Tube 29 X 58 Mm With A Wall Thickness Of 1.2 Mm. Table Legs Made From Oblong Tube 29 Plastic Tips With Standard Fde/Fnde Finish, Fixed Using Pop Rivets. Mounting Of The Legs To The Table Top Structure Using A Conical Fitting And Locked Using A Screw. Painting With Electrostatic Epoxy Powder Coating, With Metallic Surface Preparation Using Nanotechnology (Nanoceramic). Book Holder: Book Holder In Rectangular Shape, Injected In Thermoplastic With Textured Surface. Open On All Sides Facilitating Material Handling. Top Injected In Virgin Thermoplastic, With Pigmentation, Smooth Surface Without Shine. Sides With Angles Allowing The Formation Of Circles. Top Fixed To The Countertop Using Six Fittings, Four Snap-Fit Clicks And Two Towers For Fixing With Screws. The Counter Top Supports, Reinforces And Structures The Surface Of The Top In Addition To Providing A Finish On The Lower Part Of The Table Top. A Rectangular Object Holder On Its Front. Approximate Dimensions: Width: 605 Mm Depth: 45, Fixed Chair 4 Stackable Feet The Chair Must Be A Monoblock Model, Produced In Engineering Thermoplastic Additive With Fiberglass, Free Of Toxic Elements, Produced Through A Single Injection Cycle. The Backrest Must Have Four Symmetrical Longitudinal Grooves To Facilitate Thermal Transfer. The Chair Must Contain Fixed Shoes, To Keep The Base Supported On The Floor And Avoid Direct Contact Of The Chairs Feet With The Support Surface. It Must Have A Stacking Capacity Of Up To Eight Units. Capacity For Up To 182 Kg. Present Approximately The Following Measurements: Total Width: 437Mm X Total Height: 836Mm X Total Depth: 523Mm. Seat To Floor Height: 456Mm. You Must Present The Following Certification: Certificate Of Conformity In Accordance With Inmetro Ordinance No. 166 Of April 14, 2021, Conformity Assessment Requirements For Monoblock Plastic Chairs, By Certification Model 5 And Nbr 14776/2013, Together With Test Reports. Abnt Nbr Iso 9001:2015 Showing That The Manufacturers Quality Management System Meets The Requirements Of The Standard. Abnt Nbr Iso14001:2015 Evidencing That The Manufacturers Environmental Management System Meets The Requirements Of The Standard. Solid Waste Disposal Certificate Issued To The Product Manufacturer Together With Proof Of Waste Delivery. Federal Technical Register Of Potentially Polluting Activities And Users Of Environmental Resources - Ctf/A