Bids Are Invited For Opening Of Process For Acquisition Of Data Processing Equipment To Guarantee The Efficiency, Security And High Availability Of The Communication And Data Processing Network. Aquisi

Layer 2 Network Switch, Managed Or Smart, Necessary For Network Infrastructure And Data Processing. It Must Have At Least 16 (Sixteen) Rj-45 Ports With Gigabit Ethernet Speed (10/100/1000 Base-T), With Mandatory Support For Auto Mdi/Mdix. For Uplink And Connection To Optical Fiber, It Must Include At Least 02 (Two) Sfp (Small Form-Factor Pluggable) Ports, And It Is Mandatory To Supply A Set Of 02 (Two) Gbic/Sfp Modules (Single-Mode Or Multimode Type, As Required) Compatible With The Switch Ports. The Minimum Switching Capacity Must Be Equal To Or Greater Than 36 Gbps (Gigabit Per Second), Guaranteeing Non-Blocking Data Flow. The Equipment Must Support The Ieee 802.1Q (Vlan Tagging) And Ieee 802.3Ad (Link Aggregation - Lacp) Network Standards, And Must Allow Management Via A Web Interface (Http/Https) And Snmp. The Power Supply Must Be Internal And Automatic Bivolt (100-240V Ac), The Format Preferably Rackmount (Standard 19 Inches), With Mounting Kit Included., High-Speed Simultaneous Dual-Band Wireless Router, Must Operate At The Minimum Ac1200 Standard (Or Higher), Capable Of Reaching Maximum Theoretical Aggregate Speed Of 1,200 Mbps (Minimum 300 Mbps On 2.4 Ghz And Minimum 867 Mbps On 5 Ghz). It Is Essential That All Ethernet Ports, Both The Wan (Internet) Port And The Lan Ports, Are Gigabit Ethernet Standard (10/100/1000 Mbps), Ensuring High Wired Transfer Rates. The Equipment Must Support Mu-Mimo Technology (Multi-User, Multiple-Input, Multiple-Output) And Beamforming Features For Intelligent Optimization Of The Wi-Fi Signal, In Addition To Having Advanced Security Features (Wpa3 Or Wpa2, Guest Network And Access Control). It Must Also Have Management Functions Such As Vlan Or Network Segmentation And Bandwidth Control (Qos). For Greater Coverage, The Router Must Have At Minimum 04 (Four) External Antennas., High Performance Wireless Access Point (Access Point - Ap), For Internal/Semi-External Use, Mandatory Dual-Band (2.4 Ghz And 5 Ghz) And With Support For The Minimum 802.11Ac Standard. The Main Feature Required Is Its Extended Range (Long Range), Using Antenna Technology Optimized For Covering Large Areas Or Obstacles. The Ap Must Have At A Minimum One Gigabit Ethernet Network Port (10/100/1000) And Support Power Via Ethernet (Poe - Power Over Ethernet), Including The Poe Injector (When Not Standard 802.3Af/At). It Must Allow Centralized Management Through A Controller Or Software, Enabling The Creation Of Multiple Ssid Networks And Advanced Configuration Of Security And Roaming (Smooth Transition Between Points). The Aggregate Speed Must Be At Least 1,200 Mbps (Ac1200). The Product Must Be Easy To Install On A Ceiling Or Wall And Must Be Supplied With The Complete Mounting Kit., Power Over Ethernet (Poe) Injector Source, The Purpose Of Which Is To Provide Electricity And Data Connectivity Simultaneously To Remote Network Devices, Such As Wireless Access Points (Access Points) And Ip Cameras. It Must Be Compatible And Support The Gigabit Ethernet Data Standard (10/100/1000 Mbps). The Source Must Have An Output Voltage Of 48 Vdc (Volts Direct Current) And A Maximum Output Current Of 0.65A (Amps), Or Higher. The Input Power Must Be Automatic Bivolt (100-240V Ac). Must Have Protection Against