Request For Quotation Purchasing Spare Parts For Plumbing

Soft Starter Main Technical Characteristics: • Smooth Engine Start (1…20 Sec). • Smooth Engine Stop (0…20 Sec). • Adjustment Of Starting Torque (40...70%). • Engine Shutdown When Triggered: O Network Phase Control Systems; O Engine Phase Control Systems; O Engine Overload Monitoring Systems. • Side-By-Side Installation • Built-In Bypass – Reduces Heat Generation And Increases The Service Life Of Semiconductors. • 2 Or 3 Wire Start/Stop Control. • Wide Operating Temperature Range. Main Parameters: Parameter Meaning Starting Torque 0...70% Mnom Acceleration Time 1…20 Sec Braking Time 0…20 Sec Mains Voltage 3×400 V Protection Degree Ip20 Control Method Thyristor In Two Phases Setting Method Three Rotary Switches Operating Conditions The Device Is Intended For Use In The Following Conditions: • Closed Explosion-Proof Rooms Without Aggressive Vapors And Gases; • Ambient Temperature: From Minus 25 To Plus 60 °C; • Relative Air Humidity: From 30 To 80% Without Moisture Condensation; • Atmospheric Pressure: From 54.0 To 106.7 Kpa; • Permissible Installation Altitude Above Sea Level: No More Than 5000 M., Output: Dc Voltage 24V Rated Current 5A Current Range 0~5A Rated Power 120W Output Noise Level 120Mvp-P Voltage Adjustment Range 24 ~ 28V Voltage Tolerance ±1.0% Output Voltage Instability Via Network ±0.5% Load Instability ±1.0% Setup Time, Rise Time 1200Ms, 60Ms/230Vac 2500Ms, 60Ms/115Vac Atfull Load Hold Time 16Ms/230Vac 10Ms/115Vac At Full Load Login: Input Voltage Range 90 ~ 264Vac 127 ~ 370Vdc Frequency Range 47 - 63Hz Efficiency 88% Ac 2.25A/115Vac 1.3A/230Vac Withstand Voltage L/P-0/P:3Kvac L/P-Fg:2Kvac O/P-Fg:0.5Kvac Starting Current 20A/115Vac 35A/230Vac Protection: Overvoltage Protection 29 ~ 33V / Protection Type: Shut Down O/P Voltage, Re-Power On To Recover Overload Protection 105 ~ 130% Rated Output Power / Protection Type: Constant Current Limiting, Recovers Automatically After Fault Condition Is Removed Ambient Conditions Wednesday: Operating Temperature Range -20 ~ +70°C Operating Humidity 20~95%Rh Non-Condensing Temperature Coefficient ±0.03%/°C (0~50°C) Vibration Component:10 - 500Hz, 2G 10Min./1 Cycle, 60Min. Each Along X, Y, Z Axes; Mounting: Compliance To Iec60068-2-6 Storage Temperature And Humidity -40 ~ +85°C, 10- 95% Rh Safety And Emf: Safety Standards Ul508, Tuv En60950-1 Approved Insulation Resistance L/P-O/P, L/P-Fg, O/P-Fg:>100M Ohms / 500Vdc / 25”C / 70% Rh Electromagnetic Compatibility Compliance To En55022 (Cispr22), En61204-3 Class B, En61000-3-2,-3 Electromagnetic Immunity Compliance To En61000-4-2,3,4,5,6,8,11, En55024, En61000-6-2 (En50082-2), En61204-3, Heavy Industry Level, Criteria A Other: Mtbf (Mean Time Between Failures) 456.3K Hrs Min. Mil-Hdbk-217F (25°C) Overall Dimensions 40*125.2*113.5Mm (W*H*D) Packaging 0.6Kg; 20Pcs/13Kg/1.16Cuft