Tenders Are Invited For Improving The Level Of Population Protection By Equipping District Organizational Units With Equipment Resources Enabling Effective Response In States Of Constant And Full State Defense Readiness Through...

The Subject Of The Order Is: A Set Of Battery-Powered Hydraulic Tools And Aed Defibrillators And R1 Emergency Medical Kits In Accordance With The Following Two Independent Parts.1.1 Part I - A Set Of Battery-Powered Hydraulic Tools1.2 Part Ii - A Semi-Automatic Aed Defibrillator And A Modular Backpack R1.2. Part I:2.1. General Description Of The Order: The Subject Of The Order Is The Delivery Of A Brand New Set Of Battery-Powered Hydraulic Rescue Tools With Accessories. Please Provide The Brand And Type Of Each Device. The Offer Must Be Accompanied By Copies Of Cnbop Certificates Of Approval For Use Of Individual Devices (Required By Regulations) And Brochures/Catalogues Confirming The Technical Parameters Of The Equipment, Etc. Brand New Devices, Year Of Production Not Earlier Than 2024. All Tools In The Set Are Powered By Batteries.2.2. Technical Parameters: A Set Of Cordless Hydraulic Rescue Tools Consisting Of At Least The Following Elements: 1) Scissors Type Min. Bc – 1 Pc. With Minimum Parameters: − Working Pressure: 720/72 Bar/Mpa − Blade Opening Min. 182 Mm-Max. Cutting Force: 1389/141.6 Kn/T-Round Bar (S235 According To En 31204): Min. 41 Mm − Ip57 (Possibility Of Submerged Operation) − Weight Of The Device Ready For Operation Max. 21.5 Kg - 6-Point Led Lighting Built Into The Handle - Slanted Blades (30 Degrees) - Two Operating Speeds Of The Device (Precision Mode, Fast Mode) - Possibility To Charge The Battery Directly On The Tool (Without Having To Remove The Battery From The Device) 2) Min. As– 1 Pc. With A Cutting Capacity Of Min. H With Minimum Parameters: − Working Pressure: 720 / 72 Bar/Mpa − Expansion Width Min. 725 Mm-Max. Expansion Force Min. 366 / 37.3 Kn/T-Min. Expansion Force 25 Mm From The Ends In Accordance With The En 13204 Standard: 54 / 5.5 Kn/T − Compression Force Min. 135 / 13.8 Kn/T-Pulling Force Min. 67 / 6.8 Kn/T−Pulling Range Max. 610 Mm − Classification According To En 13204 - As54/725-21.0 − Ip57 (Possibility Of Submerged Operation) − Weight Of The Device Ready For Operation Max. 21 Kg - 6-Point Led Lighting Built Into The Handle - Tips With Gripping Teeth (Shark Teeth Type) - Two Operating Speeds Of The Device (Precision Mode, Fast Mode) Possibility Of Charging The Battery Directly On The Tool (Without Having To Remove The Battery From The Device) 3) Telescopic Spreader - 1 Pc. With Minimum Parameters: - Built-In Led Lighting On The Piston And Base Side, - Laser Pointer Built Into The Working Head - Max. Working Pressure: 540 / 54 (Bar/Mpa) − Stroke Of Piston 1: 405 Mm − Stroke Of Piston 2: 382 Mm − Total Stroke Of Pistons: 787 Mm − Length Of The Retracted Tool: 578 Mm − Length Of The Extended Tool: 1365 Mm − Equipped With An Extension Enabling The Expansion Of Elements At A Distance Of Up To 1804 Mm − Max. Expansion Force 1 Piston 136 / 13.9 (Kn / T)−Max. Expansion Force 2 Piston 65 / 6.6 (Kn / T) − Ip57 (Possibility Of Submerged Operation) − Weight Of The Device Ready For Operation 20.5 Kg4) Battery – 5 Pcs.