Dimensions 50X100x4mm - Grade Amg 2.5 Gost4784-97 Rolled Gost 21631-76 (Rf Welding Technology), Plug 1/2 Internal Thread + Paranit Gasket (Rf Welding Technology), According To The Drawing, Cut 3Mm Aluminum Sheet Using A Laser Cutter Into A Quantity Of 13 Parts, 2 Pipe Parts. (Rf Welding Technology), Dimensions 250X100x12mm - St3sp, 09G2s Or Their Substitutes According To Gost 19281-89 (Rf Welding Technologies), Gost 33228-2015, 09G2s Turning Of One End According To Gost 16037-80 Connection C17, But The Milling Angle Is 30˚ With A Blunting Of 3 Mm (Ws Requirements (Rf Welding Technology), Dimensions 50X150x12mm - St3sp, 09G2s Or Their Substitutes According To Gost 19281-89 (Rf Welding Technology), According To The Drawing, Cut 10Mm Sheet Metal Into 21 Pieces (0.6 M²) And 5 Pipe Parts (Rf Welding Technology), Dimensions 50X150x16mm - St3sp, 09G2s Or Their Substitutes In Accordance With Gost 19281-89 End Milling In Accordance With Gost 5264-80 Connection C17, But The Milling Angle Is 30˚ With A Blunting Of 3Mm (Ws Requirements (Rf Welding Technology), According To The Drawing, Cut 2Mm Non-Rusting Steel Sheets Using A Laser Cutter Into A Quantity Of 13 Parts, 3 Pipe Parts. (Rf Welding Technology), Gost 33228-2015, 09G2s Turning Of One End According To Gost 16037-80 Connection C17, But The Milling Angle Is 30˚ With A Blunting Of 3 Mm (Ws Requirements (Rf Welding Technology), Dimensions 250X125x12mm - St3sp, 09G2s Or Their Substitutes According To Gost 19281-89 (Rf Welding Technology), Dimensions 50X100x4mm - Grade 12Х18н10т Gost 5632-72 Rolled Gost 19903-74 (Rf Welding Technology), Dimensions 50X150x10mm - St3sp, 09G2s Or Their Substitutes In Accordance With Gost 19281-89 End Milling In Accordance With Gost 5264-80 Connection C17, But The Milling Angle Is 30˚ With A Blunting Of 3Mm (Ws Requirements (Rf Welding Technology), Dimensions 250X100x10mm - St3sp, 09G2s Or Their Substitutes In Accordance With Gost 19281-89, End Milling In Accordance With Gost 5264-80 Connection C17, But The Milling Angle Is 30˚ With A Blunting Of 3Mm (Ws Requirements) (Rf Welding Technologies), Dimensions 250X125x16mm - St3sp, 09G2s Or Their Substitutes In Accordance With Gost 19281-89, End Milling In Accordance With Gost 5264-80 Connection C17, But The Milling Angle Is 30˚ With A Blunting Of 3Mm (Ws Requirements (Rf Welding Technology)
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
