Request For Quotation Purchasing Equipment For The Laboratory

Lamp For Working With A Soldering Iron - Lamp With Led Panel 1. 2 Pcs. 2. Power Of At Least 24W. 3. Material Metal, Plastic, Abs Plastic. 4. Mechanical Switch Type. 5. Brightness Adjustment Available. 6. Brightness Up To 2000 Lumens. -Spring Hinge Bracket 1. 3Pcs. -Desk Clamp 1. 3Pcs. -Power Cord With Switch 1. 3Pcs. -Operating Instructions 1. 3Pcs., Trinocular Microscope 1. 1 Piece. 2. There Is A Rotating Nozzle. 3. Revolving Device With At Least Three Lenses. 4. Minimum Magnification No More Than 4.0X. 5. Maximum Magnification Of At Least 1600.0X. 6 There Is A Combined Backlight. 7. Wi-Fi, Usb Connection. 8. Display Lcd Screen. -Usb Type-C Cable 1. 1Pc. -Microscope Stand 1. 1Pc. -Sample Plate 1. 1Pc. -Instruction Manual 1. 1Pc., Cordless Drill-Driver, Non-Impact, - Cordless Drill-Screwdriver 1. 1 Pc. 2. Maximum Torque Not Less Than 96 Nm. 3. Impact Frequency Up To 30,000 Beats/Min. 4. Torque Settings Of At Least 22+1+1. 5. Mechanical Transmission Of At Least Two Speeds. 6. There Is A Battery Charge Indicator. 7. Motor Type Is Brushless. 8. Built-In Led Backlight. -Battery 1. 2Pcs. 2. Battery Voltage Is At Least 20 V (Li-Ion). 3. Battery Capacity Is At Least 4.0 Ah. -Charger 1. 1Pc. -Drills 1. 1Kt. -Bits 1. 1Kt. -Case 1. 1Pc. -Instruction Manual 1. 1Pc., Engraving Machine With A Set Of Tools - Grinding Tool 1. 1 Pc. 2. Engine Power Of At Least 200 W. 3. Rotation Speed (No-Load Speed) No Less Than 10,000 ... 35,000 Rpm. 4. The Diameter Of The Collet (Chuck) Is At Least 2.4 / 3.2 / 3.0 Mm. 5. Diameter Of Nozzles (Maximum) Up To 6 ... 10 Mm. 6. Supply Voltage 220 V, 50 Hz. 7. The Weight Of The Device Is About 0.5 ... 1.0 Kg. 8. Delivery Set: About 210 Nozzles. 9. Smooth Speed Control. -Cord (Cable) 1. 1Pc. 2. The Length Of The Power Cable Is At Least 1.5 ... 2.0 M. - Set Of Attachments 1. 1 Set. -Collets Of Different Sizes 1. 1Kt. -Key(S) For Attaching Attachments 1. 1 Pc. -Protective Cover Or Casing 1. 1Pc. -Adapters Holders 1. 1Pc. -Instruction Manual 1. 1Pc. -Cases Or Storage Bags 1. 1Pc. - Grinder 1. 1 Pc. 2. Rotation Speed Of At Least 12,000 Rpm, -Reciprocating Saw 1. 1 Pc. 2. Stroke Frequency Of At Least 2800 Beats/Min. -Circular Saw 1. 1Pc. 2. Rotation Speed Of At Least 6000 Rpm. -Puncher 1. 1Pc. 2. Impact Energy Not Less Than 1.5 J. 3. Impact Frequency 5000 Beats/Min. -Multi-Tool (Renovator) 1. 1 Pc. 2. Oscillation Frequency Of At Least 20,000 Rpm. -Chainsaw 1. 1Pc. The Circuit Frequency Is At Least 10–12 M/S., Cordless Angle Grinder - Angle Grinder 1. 1 Pc. 2. Motor Type Is Brushless. 3. Disc Diameter Up To 76 Mm / 125 Mm. 4. Rotation Speed Of At Least 9000 Rpm. 5. Cartridge Type M14 Or 5/8. 6. There Is A Speed Adjustment. 7. Built-In Led Backlight. 8. There Is Overheating Protection, Overload Protection. - Battery 1. 2 Pcs. 2. Battery Voltage Not Less Than 21V. 3. Capacity Not Less Than 4.0 Ah. - Charger 1. 1 Pc. - Protective Cover 1. 1 Pc. - Handle 1. 1 Pc. - Key For Replacing The Disk 1. 1 Pc. - Replacement Disks 1. 1 Pc. - Operating Instructions 1. 1 Pc. - Cases Or Storage Bags 1. 1 Pc., Universal Multimeter -Main Device 1. 1 Pc. 2. Charging / Power Interface Li Ion / Li Pol 3.7V, 1500 Mah. 3. Built-In Visual Flaw Detector (Vfl) Wavelength ≈ 650 Nm, Source Power ~ 10 Mw. 4. Optical Power Meter (Opm) Supported Wavelengths: 850 / 1300 / 1310 / 1490 / 1550 / 1625 / 1650 Nm 5. Measurement Range In Opm –70 ... +10 Dbm 6. Cable Length Measurement Accuracy ≤20 M: ±1.6 M; Scanning (When Tracing) At Least 455 Khz 8. Poe Functions - Detecting The Presence Of Poe, Checking Standards (For Example, 802.3Af / At), Voltage And Polarity. 9. Detection Of Hidden Voltage (Ncv) Is Available - Receiver With Liquid Crystal Display, Lcd 1. 1 Pc. - Wire Probes / Cables With Alligator Clips 1. 1 Pc. 2. Cat 5, Cat 6 (Stp / Utp) 3. Maximum Cable Measurement Length Up To 60V - Adapters (Rj11, Rj45, Etc.) 1. Usb Cable 1. 1 Pc. / Transportation 1. 1 Piece - User Manual / Instruction 1. 1 Piece., 3 D Printer H2d Base Unit 1. 1 Pc. 2. Fdm / Fused Deposition Modeling Printing Technology 3. Print Volume (One Head) No Less Than 325 × 320 × 325 Mm 4. Volume With Two Heads No Less Than 300 × 320 × 325 Mm. 5. Active Heating Of The Chamber (Convection / Temperature) Up To 65°C. 6. Travel Speed Up To 1000 Mm/S. 7. Maximum Acceleration Up To 20000 Mm/S². 8. Filament Diameter 1.75 Mm. 9. Supported Materials Pla, Petg, Tpu, Abs, Asa, Pa, Pc, Pva, Bvoh, Carbon Fiber/Glass Fiber Composites, Etc. 10. Security/Sensors No Less Than, Door Sensor, Temperature Detectors, Flame Detector, Laser Protection. 11. Case Dimensions No Less Than 490 × 510 × 620 Mm. -Extruder/Hotend 1. 2 Pcs. 2. Maximum Nozzle Temperature Is Not Less Than 350°C. 3. Supported Nozzle Diameters Are 0.2/0.4/0.6/0.8Mm. - Heated Platform (Heatbed) 1. 1 Pc. 2. The Maximum Table Temperature Is At Least 120°C. -Camera/Sensor Systems. 1. 1 Set. 2. Automatic Calibration System Using Lidar + Sensors. 3. Cameras / Visual Control Of At Least 4 Built-In Cameras. -Ams System 1. 1Pc. -Cutting Module 1. 1Pc. 2. Laser Module Power Of At Least 40W, With A Working Area In Xy Of At Least 310 X 250 Mm, Maximum Cutting Thickness Up To ~15 Mm For Plywood / Linden. -Air Assist. 1. 1Pc. -Air Filtration 1. 1Pc. -Documentation. 1. 1Pc. -User Manual 1. 1Pc., Special Workbench, Metal - Workbench 1. 1 Pc. 2. Dimensions (Height × Width × Depth) No Less Than ≈866 × 1200 × 700 Mm. 3. The Maximum Load On The Workbench Is At Least ~1000 Kg. 4. Colors And Coating Body Gray (Ral 7038) + Facades / Elements – Blue (Ral 5002); Coating - Powder Paint. -Tabletop 1. 1Pc. 2. At Least Mdf ~24 Mm Thick + Galvanized Metal Sheet 1.2-1.5 Mm On Top. 3. The Maximum Load On The Tabletop Is About 300 Kg Of Distributed Load. - Cabinet Wd 2 1. 1 Pc. 2. The Load On The Box Is At Least 30 Kg. -Support Wf 1 1. 1Pc. -Shelf And Wall Wsh 120/1 1. 1 Pc. -Perforated Screen Ws 120 1. 1Pc. -Led Lighting 1. 1Pc. -Tool Accessories 1. 1Pc. -Documentation 1. 1 Piece. -User Manual 1. 1Pc.