Bids Are Invited For Acquisition Of School Uniform Kits And Sneakers For Distribution To Students In The Municipal Education Network, To Meet The Needs Of The Education Department. The Demand Presented Arises From The Need To Ensure That Students In The Municipal Education Network Adequately Receive Standardized School Clothing Items, A Complete Uniform Kit And Sneakers, Ensuring Equity, Identification And Comfort During The Development Of School Activities. This Need Is Directly Linked To The Public Interest, As It Promotes The Appreciation Of The School Environment, In Addition To Contributing To Equal Opportunities Among Students, By Avoiding Visible Social Distinctions And Strengthening The Feeling Of Belonging To The Educational Institution. The Need To Standardize Student Attire Reinforces The Feeling Of Belonging To The School Environment. In This Way, The Department Of Education Highlights Its Concern With Equality, Seeking To Eliminate Visual Factors That May Highlight... Cont

School Uniform Kit, From Size 1 To Adult Size, Consisting Of: (1) T-Shirt: Made From Pvc Half Mesh, Composed Of 67% Polyester And 33% Viscose, With A Weight Of 175 G/M², In Pantone Gray Mixed Color 12-0404 Tpx. Raglan Sleeves Made From Pv Half Mesh, Weight 175Gr/M², In Pantone Royal Blue Color 19-3955 Tpx, Must Contain Two Overlapping Stripes, In Pantone Gray Mixed Color 12-0404 Tpx, With A Uniform Width Of 1.0 Cm. The Friezes Are Parallel To Each Other, With A Distance Of 1.0 Cm Between Them, Applied Continuously. Fastening Must Be Done With Reinforced Double Stitching, Using Thread In The Color Corresponding To The Frieze, Guaranteeing Resistance And A Uniform Aesthetic Finish. The Collar Of The Shirt Must Be Round In 1X1 Rib, Composed Of 50% Polyester 48% Cotton 2% Elastane, Weight 260 Gr/M², In Color Royal Blue Pantone 19-3955 Tpx. The Collar Must Be 20Mm Finished. And Personalization On The Front, On The Left Side Of The Person Wearing At Chest Height, The Coat Of Arms Of The Municipality Must Be Applied, Through The Application Of Dft (Transfer Film Decal), Using High Definition Digital Printing On Polyurethane (Pu) Thermo-Adhesive Film, With A Thickness Between 80 And 120 Microns And A Matte Or Semi-Gloss Finish. Application Must Be Carried Out Using A Flat Heat Press, At A Temperature Between 150°C And 165°C, For 10 To 15 Seconds, With Medium To High Pressure, As Per The Manufacturers Instructions. The Dft Applied Must Present High Resistance To Washing, Withstanding At Least 30 Cycles At 40°C, Without Loss Of Adhesion, Color Or Definition, And With A Minimum Resistance To Friction Of Grade 4, In Accordance With Abnt Nbr Iso 105 X12. Closing The Sides, Shoulders And Armholes Of The Sleeves Must Be Done Using An Overlock Machine. To Make This Piece, 100% Polyester Thread, No. 120, In The Color Of The Fabric Must Be Used. (1) Long Sleeve T-Shirt: Made Of Half Pv Mesh, In Pantone Mixed Gray Color..., Sneakers Numbered (14 To 29), With Minimum Characteristics: Color And Material Of The Upper And Tongue - The Upper Of The Upper, Sides And Tongue, Must Be Made Of 100% Cotton Canvas, Of At Least 300 Grams Per Square Meter, In Navy Blue Similar To Pantone 19-4023 Tpx, And Must Be Doubled With Twill Also Made Of 100% Destarched Cotton With A Minimum Weight Of 230 Grams Per Square Meter, Thus Totaling A Minimum Of 530 Grams Per Square Meter, In The Set. Strong Counter - The Strong Counter Is Located In The Heel Region Between The External Canvas And The Internal Foam. It Is Made Of Flexible Vulcanized Elastomer With A Minimum Thickness Of 1.2 Mm; It Must Be Chamfered Along Its Entire Upper Edge With A Minimum Width Of 8 Mm, Ending In Zero. Lining - The Sneaker Must Be Fully Lined Internally With Helanca Fabric (Minimum Weight 150 Gr/M2) In Anti-Pilling Black, Doubled With Polyurethane Foam Of At Least 5 Mm Thick And Density 26 Kg/M3 (Kilogram Per Meter). Cubic).Welting And Seams - The Upper Must Be Fully Hemmed. The Piping Will Be Grosgrain With A Minimum Width Of 12Mm And With Edges That Do Not Fray. In The Same Color As The Upper. All Seams Are 3 To 4 Stitches/Cm And Have A Finish Of At Least 2 Stitches At The Ends. The Visible External Seams Must Be Double And Spaced 2.2 To 2.6 Mm Apart. The Thread Used Must Be Made Of Polyamide (Nylon) Commercial Number 40, In White.