Tenders Are Invited For Heavy-Duty Motor Vehicles – Large Truck (15 T) Procurement 2025

Heavy-Duty Motor Vehicles – Large Truck (15 T) Procurement 2025. Procurement Of Goods Sales Contract For The Purchase Of 1 New 15-Tonne Heavy Truck Basic Requirements: Technical And Quality Acceptance Location Of 1 15-Tonne Heavy Truck: Budapest Közút Zrt. 1107 Budapest, Bihari Utca 4. Handover (Delivery) Conditions: The Vehicle Must Be Handed Over After An Inspection And With A Registration Number. The Registration Tax, Marketing Fee, All Costs Are Borne By The Bidder And Are Part Of The Bid Price. The Vehicle To Be Delivered Must Comply With 6/1990. (Iv. 12.) Köhém Decree (On The Technical Conditions For Putting Road Vehicles Into Circulation And Keeping Them In Circulation) In Force. The Technical And Quality Acceptance Of The Vehicle Takes Place At The Contracting Authoritys Premises. If, At The Time Of Acceptance, The Design Of The Vehicle Differs From That Contained In The Accepted Offer, The Contracting Authority May Refuse Acceptance. In This Case, The Contracting Authority Will Proceed With A Penalty Claim, And The Tenderer May Reject Any Claim For Compensation. Documents To Be Handed Over: (They Can Be Completed At The Same Time As The Vehicle Is Delivered) - Operating Instructions In Hungarian For The Type Ordered, Also Electronically - Maintenance Instructions In Hungarian For The Type Ordered - Service Manual. Technical Data: Main Technical Characteristics: Dimensions And Weight Data - Chassis Design And Wheel Formula (A And C Steered Single Wheel, B Driven Double Wheel): 6X2 - Wheelbase (A-B): Max. 4,300 Mm - Wheelbase (B-C): Min. 1,300 – Max 1,400 Mm - Total Length: Max. 8 100 Mm - Total Width (With Rear-View Mirror): Max. 3,000 Mm - Cabin Height (Without Rotating Flasher): Max. 3,300 Mm - Internal Length Of The Rearward-Tilting Platform: Min. 5,200 Mm - Internal Width Of The Rearward-Tilting Platform: Min. 2,400 Mm - Height Of The Side Wall Of The Loading Surface With A Platform That Can Be Tilted Backwards And Opens At The Upper Pivot Point: Min. 900 Mm - Shield Height: Min. 1,400 Mm - Maximum Permissible Total Weight (Vehicle): Min. 26,000 Kg - Maximum Permissible Total Weight (Vehicle Assembly): Min. 50,000 Kg Superstructure - Loading Surface That Tilts To 3 Sides (Tilting Platform) - Steel Front Wall, Back Wall And Side Walls - Side Walls With Lower And Upper Opening - Back Wall With Upper Hinges, Lower Locks Open Mechanically When Tipped - Side Wall Min. 4Mm, And Min. Strenx S700 - Or Equivalent Material Quality - The Side Walls Are Of Undivided Design, With Such Spring Support That One Person Must Be Able To Open And Close Them - Floor Min. 5Mm Vtg. And Min. Hardox 450 - Or Equivalent Material Quality - It Has A Step And A Handrail - Fixed Tarpaulin On The Chest Wall - Galvanized Auxiliary Frame - Rear Lamp Protection Cover - Hydraulic Rear Equipment For Moving The Hydraulic Ramp Of The Trailer Transporting Heavy Machinery - D=400 Mm Hitch Size From The Edge Of The Platform To The Inside Max -400 Mm Engine - Min. Euro Vi - Diesel Engine Power: Min. 340 Kw - Engine Torque Min. 1800 Nm - Cylinder Capacity Max. 12,000 Cm3 - Fuel Tank Volume Min. 300 Liters - Adbl