Request For Quotation Coupler 50, Drip Hose, Valve 32.

Knee Compression Angle 50. Inlet Diameter: 50 Outlet Diameter: 50 Material: Hdpe Pressure: 10 Bar, Valve-32. Compression Ball Valve For Hdpe Pipes (Plastic Pipes) Operating Pressure Up To 10 Atmospheres, Crimp And Threaded Connections For Pipes Available, Suitable For Both Drinking Water And Industrial Water. Size – 32Mm, Polyamide (Nylon) Tube Tkc 8×10Mm: Inner Diameter: 8Mm; Wall Thickness: 1 Mm; Outer Diameter: 10Mm; Operating Pressure: 3.4 Mpa (34 Bar); Operating Temperature: -40 To +120 °C; Material: Nylon; Weight 1 Lm: 24±2 G;, Hose-50: Maximum Operating Temperature – 40 Degrees. Maximum Operating Pressure – 20 Bar Polyethylene Grade – Pe 100 Outer Diameter – 50 Mm Area Of Application Of The Pipe: For Cold Water Supply Pipe Section – Round Pipe Material Type – Polyethylene Pipe Wall Thickness – 3 Mm, Plug 32 - Compression For Hdpe Pipes 32 Mm. Nominal Pressure, Pn – 16 Bar Pipe Diameter – 32 Material – Hdpe Clamping Ring Material – White Polyacytal O-Ring Material: Nitrile Rubber (Nbr) Connection – Compression/External Thread Working Environment Temperature – Up To +40 °C Type – Coupling Thread Type – Pipe Conical Seal – Nbr, Hose-15: Pipe Material Type – Polyethylene Polyethylene Grade - Pe 100 Pipe Area Of Application - For Drinking Water, For Cold Water Supply Outer Diameter – 15 Mm Pipe Wall Thickness - 1.6 Mm Color – Black With Blue Stripe Type – Pressure Nominal Pressure (Pn) – 20 Atm., Coupling 50 - Compression Polypropylene Is Designed For Connecting Hdpe, Pp, Ldpe And Other Plastic Pipes With A Diameter From 20 To 110 Mm With A Maximum Pressure Of Up To 16 Atmospheres (Pn16, 1.6 Mpa) With Diameters Up To 63 Mm And Up To 10 Atmospheres (Pn10, 1.0 Mpa) For Other Diameters. Size - 50X50 Compression Couplings For Pe (Hdpe) Pipes, A Flexible Corrugated Pipe Is Designed To Drain Water From A Sink Or Sink. It Hermetically Connects The Siphon To The Sewer Network: Flexible Pipe Material: Polypropylene; Flexible Pipe Length, Mm: 800; Color: White;, Compression Tee 32. Tees Are Used For Quick And Reliable Installation Of Pipeline Outlets In Polyethylene Pipe Systems Used For Drinking And Technical Water Supply, In Irrigation And Sewerage Systems, For Pumping Various Liquids Material – Plastic Type – Tee Diameter – 32, Impact – Growth Stimulation And Nutrition, Strengthening Plant Growth Fertilizer Type – Mineral General Purpose – For Lawns And Flower Beds, Plastic Plug 14 Cm, Drip Sucker. Diameter: ¾ - 1.2 Cm (Male Connection) For Use With Flexsg Flexible Pipe Made From Acetal Working Pressure Up To 5.5 Bar; 550 Kpa Compatible With Flexsg, And Other Brands Of Pipe, Drip Hose. Capillary Hoses For Pressure Switch: Inner Diameter – 12Mm Wall Thickness - 4Mm Operating Pressure At 20°C – 20 Bar Material – Rubber, Compression Tee 50. Tees Are Used For Quick And Reliable Installation Of Pipeline Outlets In Polyethylene Pipe Systems Used For Drinking And Technical Water Supply, In Irrigation And Sewerage Systems, For Pumping Various Liquids Material – Plastic Type – Tee Diameter – 50, Hose-32: Maximum Operating Temperature – 40 Degrees. Maximum Operating Pressure – 20 Bar Polyethylene Grade – Pe 100 Outer Diameter – 32 Mm Area Of Application Of The Pipe: For Cold Water Supply Pipe Section – Round Pipe Material Type – Polyethylene Pipe Wall Thickness – 3 Mm, Threaded Barrel 15X15: Aquastop - No Material – Plastic Condition – New Type – Connector Working Pressure – 6 Diameter (Mm) – 15X15, Valve-50. Compression Ball Valve For Hdpe Pipes (Plastic Pipes) Operating Pressure Up To 10 Atmospheres, Crimp And Threaded Connections For Pipes Available, Suitable For Both Drinking Water And Industrial Water. Size – 50Mm, Coupling 32 - Compression Polypropylene Is Designed For Connecting Hdpe, Pp, Ldpe And Other Plastic Pipes With A Diameter From 20 To 110 Mm With A Maximum Pressure Of Up To 16 Atmospheres (Pn16, 1.6 Mpa) With Diameters Up To 63 Mm And Up To 10 Atmospheres (Pn10, 1.0 Mpa) For Other Diameters. Size – 32X32 Compression Couplings For Pe (Hdpe) Pipes, Knee Compression Angle 32. Entry Diameter: 32 Outlet Diameter: 32 Material: Hdpe Pressure: 10 Bar, Plastic Cover For Underground Valve 50Mm. Equipped With A Lid With A Special Latch. Maximum Load On The Lid 400 Kg Type – Irrigation Equipment Material – Plastic Unit Of Measurement – Piece/Pieces, Plastic Cover For Underground Valve 32Mm. Equipped With A Lid With A Special Latch. Maximum Load On The Lid 400 Kg Type – Irrigation Equipment Material – Plastic Unit Of Measurement – Piece/Pieces, Plug 50 - Compression For Hdpe Pipes 50 Mm. Nominal Pressure, Pn – 16 Bar Pipe Diameter – 50 Material – Hdpe Clamping Ring Material – White Polyacytal O-Ring Material: Nitrile Rubber (Nbr) Connection – Compression/External Thread Working Environment Temperature – Up To +40 °C Type – Coupling Thread Type – Pipe Conical Seal – Nbr