Bids Are Invited For Acquisition Of An Agricultural Implement That Distributes Liquid Organic Fertilizer And A Standard Tipper Bucket For A Vw Constellation Truck, To Meet The Needs Of The Municipal Department Of Agriculture And The Environment.

Liquid Organic Fertilizer Distributor - 4,000 Literstowable Equipment By Agricultural Tractor, New, Type Liquid Organic Fertilizer Distributor, Intended For Soil Preparation, To Pump High And Low Viscosity Liquids With A Large Quantity Of Solid Products In Suspension, With The Following Minimum Characteristics: - Capacity To 4,000 (Four Thousand) Liters;- Tandem Type Wheelset, 16 Inch Rim, 4 Tires 7.50X16, 14 Plies, New;- Monoblock Or Chassis Type Construction;- Vacuum-Compressor Pump With Cast Iron Body And Forced Lubrication, 7 300 Mm Vanes, Air Flow 4,000 Liters/Minute;- Driven By The Tractors Power Take-Off, Rotation 540 Rpm;- Hydraulic Piston For Opening The Discharge With Side Cannon And For Filling On The Left Side;- Tank Made Of Structural Steel Plate With Internal Or External Reinforcement Ring, Equipped With Safety Valves. Internal Coating In Anti-Corrosive Epoxy Paint;- 4-Inch Hose With Half-Thread Coupling And Load Protector, 8 Meters Long And Distributor Nozzle;- Full Opening Rear Cover For Inspection And Cleaning;- Level Indicator;- Vacuum Gauge;- Internal Pressure And Vacuum Valves Using Rubber Balls;- Valve Retention/Siphon System To Prevent Fertilizer From Entering The Pump;- Internal Agitator;- Cardan Shaft With Safety Protective Fairings As Per Nr-12;- Adjustable And Movable Support Foot;- Header With Lubricated Movable Swivel Coupling, With Swivel At Its Terminal And Safety Chains;- External Electrostatic Epoxy Powder Painting, Electrostatic Liquid, Or Polyurethane (Pu); - The Equipment Must Have A Metallic Identification Plate, Fixed By Rivets And Stating: A) Name And Address Of The Manufacturer; B)Equipment Model; And C) Serial Number Marked/Engraved In A Legible Format.- Platform Shipping;- Warranty Of 12 (Twelve) Months, Counting From The Date Of Supply., Standard Dump Bucket Half Cane Model, New, With Minimum Capacity Of 12M³, Anti-Corrosive Bottom With Pu Painting, Thickness Of Side And Front Covers At Minimum 8 Mm And Flooring Hardox 450 Steel Sheet (Steel With A Minimum Of 8 Mm), Cabin Protector In Structural Steel Sheet With A Minimum Thickness Of 8 Mm, Rear Cover With Hinged And Side Openings, With A Minimum 8 Mm Steel Cover Indirectly Driven By Chains, Hydraulic Pump, Oil Reservoir, Hydraulic Hoses, Power Take-Off With Driven In The Truck Cabin, Tipping System Using A Hydraulic Cylinder With Front Piston, Front Spare Tire Support, Sheet Steel Fender And Rubber Pads, For Side Signaling With Reflective Strips, Tool Box, Water Core, Side Ladder, Lashing Hooks, Side Protector As Per Current Resolution, Double Chassis And Profile Beams U Minimum 8 Mm, Sides With 12 Calendered Reinforcement U Profiles That Go From The Top Of The Cover, Running Through The Entire Side And Going To The Chassis, Both Welded At The Same Level Of The Chassis, Not Welded Overlapping On Top Of The Chassis. Bucket Swivel Pins Of At Least 50 Mm In 1045 Steel With Grease Fitting, Installed On The Inside Of The Bucket. Minimum Tipping Angle Of 45 Degrees, Installation Service Included With Primary And Secondary Safety Device Required By Contran, With 12-Month Warranty. Approximate Bucket Measurements: Length: 5.13 M.