Bids Are Invited For Acquisition Of Biometric Readers Compatible With The Ipm System And Scenario Kits For Identification Photography And Biometrics, Intended For The People Management And Identity Sectors Of The Citizens Square Of The Public Administration Of The Municipality Of Indaial,

Biometric Reader With Optical Or Capacitive Sensor, Capable Of Capturing Flat Fingerprint (One Finger), Ensuring Fast And Accurate Reading. The Minimum Capture Area Must Be 15 X 18 Mm. The Sensor Resolution Will Be At Least 500 Dpi, With Support For 256 Gray Levels (8 Bits), Guaranteeing High Quality In Capturing The Biometric Image. The Capture Speed Must Be Equal To Or Less Than 1 Second For Reading And Sending The Image, Maintaining Accuracy With False Acceptance Rates (Far) Less Than Or Equal To 0.001% And False Rejection (Frr) Up To 1%, According To Manufacturer Data. Usb 2.0 Or Higher Interface, Compatible With Previous Versions, And Can Be Powered Exclusively Via Usb, Without The Need For An External Power Source. The Cable Must Have A Minimum Length Of 1 Meter, Which May Vary Depending On The Manufacturers Specifications. Automatic Installation Via Approved Driver (Plug And Play) And Present Luminous Indication, Such As Led, To Signal The Operating Status, Including Active, Ready And Error States. The Maximum Weight Of The Equipment Must Be Up To 300 Grams, With Approximate Dimensions Of Up To 120 Mm In Length, 70 Mm In Width And 40 Mm In Height, Varying Depending On The Model. The Operating Temperature Range From 0°C To +40°C, With Relative Operating Humidity Between 10% And 90%, Without Condensation., Scenario Kit For Identification And Biometrics Photography, Composed Of The Following Items:- Reflective White Background Panel, Used To Create White Background Photos (Rgb 255-255-255), Made With Screen Rigid Expanded Polystyrene, With Approximate Dimensions Of 65 Cm X 90 Cm. The Panel Must Be Fixed To A Rigid Support Structure, Bilateral Support, With Height Adjustment. - Support Structure For The Reflective Panel: Made Of Resistant, Rigid, Detachable Material (To Facilitate Transport) And With Manual Height Adjustment Of The Panel, Allowing People Of Large Height (Up To 2.00M) To Stay Adjusted In Front Of The Panel. Assembly Of The Structure Must Be Easy And Quick, With An Attached Stool. - Stool: With A Minimum Height (From The Top Of The Seat) Of 44 Cm And A Maximum Of 47 Cm, And A Minimum Depth Of 35 Cm And A Maximum Of 47 Cm. The Stool Must Be Foldable To Allow For The Use Of A Wheelchair As Required. Document Or Manual That Informs The Correct Use, Cleaning, Sanitization And Conservation Of The Item., 11/07/2025 - 13:48:29