Bids Are Invited For Acquisition Of A Special Hydraulic Press With Nr-12 Safety Standard And A Set Of Conveyors With Mezzanine, Intended For Sorting And Compacting Recyclable Materials, Aiming To Meet The Operational Demands Of The Association Of Collectors Of Reusable And Recyclable Material Of Inhambupe-Ba Coocai, Within The Scope Of Public Policies For Solid Waste Management And Socioeconomic Inclusion Of Collectors.
Bids Are Invited For Acquisition Of A Special Hydraulic Press With Nr-12 Safety Standard And A Set Of Conveyors With Mezzanine, Intended For Sorting And Compacting Recyclable Materials, Aiming To Meet The Operational Demands Of The Association Of Collectors Of Reusable And Recyclable Material Of Inhambupe-Ba Coocai, Within The Scope Of Public Policies For Solid Waste Management And Socioeconomic Inclusion Of Collectors.
Set Of 2 Mats With Mezzanine, Structure: Consists Of 3 Mm Sheet Metal. Tabs On The Sides 150 Mm High. Placement Of Two 250 Mm Diameter Rollers (Traction Shaft And Tensioner Shaft). Rollers To Slide The Belt Along The Length Of The Treadmill. Total External Dimensions: 1000 Mm X 950 Mm X 20000 Mm. (Lxaxc). Electrical System Data: Three-Phase 10 C.V. Motor, 1150 Rpm; Motor Voltage According To Local Network. Speed Governor. Placement Of A Stop Button On Both Sides Of The Treadmills. Electrical Panel For Treadmill Operation. 24V Switched Source. Emergency Button. Safety Relay For Monitoring The Emergency Button. Reduction Data: Have A Reducer With A Minimum Reduction Ratio Of 1X41, Power Compatible With The Described Motor Or Equivalent. Rubber: A 2-Ply Rubberized Strap. 2 Sealing Straps On The Sides. And Other Features Described In The Terms Of Reference., Special Hydraulic Press With Safety Standards. Structure: It Is Composed Of 3/8 Steel Sheets. 8 Inch I And U Beams. Conical Shaped Structure, To Facilitate The Extraction Of Bales After Tying. The Table Has 6 Guides To Offer Better Security. Hinges At The Full Height Of The Doors. Total External Dimensions (Wxxl): 850Mm X 3600Mm X 870Mm. Pressed Bale Dimensions (Wxxl): 850Mm X 750Mm X 800Mm. Hydraulic System Data: Hydraulic Cylinder With 109 Mm Diameter Rod Piston Stroke Is 1400 Mm. 6 Inch Shirt. Composed Of 70 Liters/Min Submerged Hydraulic Gear Pump. Flexible Hydraulic Hoses With Metal Connections. Hydraulic Control With 24 V Electric Coil. Check Valve At The Foot Of The Cylinder. Suction Filter For The Pump. Oil Sight Glass. And Other Characteristics In The Terms Of Reference.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
