Horizontal Pump, Single-Stage Input Type D (Complete With Electric Motor) Flow (Q): 800 M³/H Head (H): 56 M Electric Motor Power: 150 Kw Rotation Speed: 1450 Rpm Efficiency: Up To 83% Cavitation Head (Npsh): Not Less Than 5 M Working Fluid Temperature: Up To 95°C Working Fluid Density: Up To 1100 Kg/M³ Solid Particle Concentration: No More Than 0.05% By Weight, Up To 0.2 Mm In Size Flow Part Material: Gray Cast Iron Sch20 Design: Horizontal, With A Horizontal Or Vertical Electric Motor. Unit Dimensions (L×W×H): From 2430×790×975 Mm To 3300×1500×2300 Mm, Depending On The Version And Configuration Unit Weight: From 1479 To 2700 Kg Pump Weight Without Electric Motor: From 560 Kg. Unloading Of Goods Is Carried Out By The Supplier. A Mandatory Condition Is The Presence Of An Authorized Representative Of The Supplier Upon Acceptance Of The Goods. If The Goods Are Delivered By Courier, The Latter Must Provide A Duly Executed Power Of Attorney. The Customer Is Not Responsible For The Safety Of The Goods From The Moment It Is Handed Over To The Supplier Until Unloading., Type: Single-Phase Self-Priming Liquid Ring Pump; Capacity: Up To 3M³/H (≈ 50L/Min) Pressure: Up To 51M Gauge Suction Height: Up To 9M Liquid Temperature: Diesel Fuel/Fuel Oil - Up To +55°C, Water - Up To +90°C, Environment - Up To +40°C Power Supply: Single-Phase 220V, 50Hz Motor Power: 0.75 Kw (≈1 Hp) With Thermal Protection Weight: ≈ 10.9–11.8 Kg Dimensions: Approx. 296 × 140 × 180 Mm Designed For Pumping Viscous Aggressive Liquids: Oil, Fuel Oil, Diesel Fuel, Oils At Temperatures Up To +70°C. Pump Body: Gray Cast Iron With Threaded Connections According To Iso 228/1 Impeller: Brass, Star-Shaped With Open Radial Blades Drive Shaft: Stainless Steel Seal: Mechanical Ceramics‑Graphite‑Viton Engine Cooler: Enclosed Fan (Tefc) Protection Class: Ipx4 Class, Class F Insulation, Motor Rated For Continuous Duty S1, Performance: Up To 72 M³/H (~1200 L/Min), Operating Point Is Usually 60 M³/H At A Pressure Of ≈10.5 M Maximum Pressure: Up To 18–18.5 M, Nominal – About 18.1 M At 60 M³/H Suction Depth: Up To 7M Electric Motor Power: 2.2 Kw (~3 Hp) With Three-Phase Connection 380V, 50Hz; Speed – 2900 Rpm. Housing: Cast Iron With Threaded Connections Gas Uni Iso 228‑1 (3 Inlet/Outlet) Impeller: Radial Type, Brass (Cw617n) For Reliability And Corrosion Resistance Seal: Mechanical, Ceramic-Graphite (Fn‑18) Weight (Mass): ≈29–30 Kg Dimensions: Length: ~360 Mm Width: ~210 Mm Height: ~250 Mm Designed For Pumping Clean Or Slightly Contaminated Water.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
