Tenders Are Invited For Purchase Of A Backhoe Loader And A Tractor With A Cabin

The Subject Of The Order Is The Purchase Of A Backhoe Loader For The Radziechowy - Wieprz Commune, Meeting The Following Parameters And Requirements. Basic Requirements:• Year Of Production. Not Older Than 2024. • The Vehicle And Its Equipment Must Meet The Requirements Of: - Polish Road Traffic Regulations In Accordance With The Road Traffic Law (Consolidated Text: Journal Of Laws Of 2024, Item 1251); - The Vehicle Has All The Necessary Approvals Required By Law For Traffic In Poland And The European Union; • Devices And Components Installed In The Vehicle Should Meet The Requirements Of Separate National Regulations And/Or International. Technical Characteristics: General Requirementsbrand New, Year Of Production Not Older Than 2024. Backhoe Loader With All Legally Required Documents/Approvals Allowing Traffic In Poland. Minimum Dimensions: Total Length - 5,600 Mm. Width - 2,350 Mm. Height With Cabin - 2,900 Mm. Wheelbase - 2,150. Mmturbocharged Diesel Engine, Liquid-Cooledengine Capacity Minimum 3.6 Litersengine Power ≥ 110 Hp 4 X 4 Drive Automatic Gearboxsteeringfront Steering Axlehydraulic Assisted Steeringforward/Neutral/Reverse Switch In The Joystickmaximum Driving Speed ≥ 40 Km/Hhydraulic Systempump Multi-Pistonoil Flow Min. 165L/Min. Maximum Working Pressure Min. 205 Bar Operating Parameters Of The Loader Arm Control Of The Loader Arm Using Joysticks Multifunctional Bucket With Forks With A Capacity Of Minimum 1.15 M3 Load Lifted To Full Height ≥ 3,050 Kg Unloading Height Minimum 2.6 M Cabin Lockable Entrance Doors On Both Sides Of The Cabin Fully Adjustable Seat Equipped With A Seat Belt Minimum Noise Level In The Cabin 75 Db Ventilation / Heating / Air Conditioning Led Warning Lamps Led Work Lamps Immobiliser Windshield Wiper With Washer Rearexternal Mirrorsoperating Parameters Of The Excavator Armcontrol Of The Excavator Arm Using Joysticks Maximum Digging Depth ≥ 5.88 Mmmaximum Loading Height ≥ 4.6 M 3-Piece Wide Bucket: - 600 Mm - 400 Mm - Tilting Slope 1500 Mm Hydraulic Movement Of The Excavator Arm Other Drilling Rig Intended For Installation In A Backhoe Loader With A Diameter Of 300 Mm. A Hydraulic Hammer Adapted To A Backhoe Loader With A Minimum Weight Of 300 Kg And A Minimum Force Of 700 Joules. Operating Manual In Polish. The Contractor, At His Own Expense, Will Deliver The Subject Of The Order To The Location Designated By The Ordering Party (The Ordering Party Will Provide The Contractor With The Exact Delivery Address At Least Two Days Before The Planned Delivery) Located In The Radziechowy - Wieprz Commune. Documents Required In The Collection Phase Of The Backhoe Loader Along With The Delivery Of The Equipment, The Contractor Must Attach The Following Documents In Polish: - Service Inspection Book, - Ce Certificate, - Instructions For Use And Service In Polish (Or With A Translation Into Polish), - Extract From The Approval Certificate Or Ec Certificate Of Conformity For Vehicles For Which It Is Required - In Accordance