Bids Are Invited For Srp For Future And Eventual Acquisition Of Various Hydraulic Materials (Rings And Concrete Plug, Iron Plug And Frame, Butterfly Valves, Etc.) According To Etp And Terms Of Reference Attached To The Case File.

Concrete Rings - Concrete Rings With Steps And Internal Bag, Dn 600, Height 0.5M, 25M, Cap - Hinged Dn 600 Cap, With Polyethylene Ring And Automatic Locking - Cl 400 - 40 Tons - Nodular Cast Iron (Ductile) - Vehicle Traffic, Cap - Cap Concrete (Frame And Cover) With Cast Iron Charter Ring For Pv 600Mm Diameter, Minimum Breaking Load Of 30 Tons, Cover - Concrete Cover With Cast Iron Charter Ring For Pv 600Mm Diameter, 05/11/2025 - 07:29:11, End - Bag/Flange End 80Mm Cast Iron, End - Bag/Flange End 100Mm Cast Iron, End - Bag/Flange End 125Mm Cast Iron, End - Bag/Flange End 150Mm Cast Iron, End - Bag/Flange End 200Mm Cast Iron, End - Bag/Flange End 250Mm Cast Iron, End - Bag End/Flange 300Mm Cast Iron, End - Bag End/Flange 400Mm Cast Iron, End - Bag End/Flange 500Mm Cast Iron, End - Bag End/Flange 600Mm Cast Iron, Valve - Flanged Butterfly Valve 1/4 Turn Eccentric With Gear Reduction Box And Handwheel - Dn 100Mm (As Described Below). - Dimension: Distance Between Flanges According To Standard Iso 5752 Series 14 (Face To Face L=190Mm); - Body: In Nodular Cast Iron - Epoxy Powder Coating Applied Electrostatically In Blue Ral 5005 Or Ral 5017; - Disc: In Nodular Cast Iron - Epoxy Powder Coating Applied Electrostatically In Blue Ral 5005 Or Ral 5017; - Sealing Ring Tightening Counter Flange: Made Of Nodular Cast Iron With Electrostatically Applied Epoxy Powder Coating In Blue Ral 5005 Or Ral 5017. - Flanges: According To Standard Nbr 7675 Pn10/16; - Reduction Box Drive Torque: Calculated With An Increase Of At Least 20% Of That Required By The Valve; - Screws: Stainless Steel; - Shaft: Formed In A Single Piece In Round Stainless Steel With Key Slot Fitting In The Gearbox; - Accessories To Be Supplied Together With The Valve: A) 02 Pieces Of Rubber Ring For Flange With Internal Metallic Armor, Made Of Epdm 60 Shore A Rubber And With Holes/Supports For Screws - Dn 100 Pn10/16/25. B) Set Of Bolts And Nuts With Full Thread And Galvanized For Mounting The Flanges., Valve - 1/4 Turn Eccentric Flanged Butterfly Valve With Gear Reduction Box And Handwheel - Dn 150Mm (As Described Below). - Dimension: Distance Between Flanges According To Standard Iso 5752 Series 14 (Face To Face L=210Mm); - Body: In Nodular Cast Iron - Epoxy Powder Coating Applied Electrostatically In Blue Ral 5005 Or Ral 5017; - Disc: In Nodular Cast Iron - Epoxy Powder Coating Applied Electrostatically In Blue Ral 5005 Or Ral 5017; - Sealing Ring Tightening Counter Flange: In Nodular Cast Iron - Epoxy Powder Coating Applied Electrostatically In Blue Color Ral 5005 Or Ral 5017. - Flanges: In Accordance With Standard Nbr 7675 Pn10/16; - Reduction Box Drive Torque: Calculated With An Increase Of At Least 20% Of That Required By The Valve; - Screws: Stainless Steel; - Shaft: Formed In A Single Piece In Round Stainless Steel With Key Slot Fitting In The Gearbox; - Accessories To Be Supplied Together With Valve: A) 02 Pcs Rubber Ring For Flan