Bids Are Invited For Acquisition Of School Furniture

School Set Teacher Table And Chair - Cjp-01 Minimum Descriptions Set Composed Of (1) A Table And (1) A Chair In Accordance With Ordinance 401 In Accordance With Abnt Standards 14006/2008, Table Width Of 650 Mm, Length Of 1,200 Mm, Depth Of 450 Mm, Height Of 760 Mm To The Top And Chair With A Height Of 450 Mm Fnde Standard. Table Specifications: Top In Mdp Or Mdf, With A Thickness Of 18 Mm, Covered On The Upper Face In High Pressure Melamine Laminate, 0.8 Mm Thick, Textured Finish, In Gray Color, Rounded Corners (According To Project). Coating On The Lower Face In 0.6 Mm Balancing Plate (Phenolic Counter Plate). Application Of Claw Nuts With Metric M6 Thread And 10 Mm Length (See Details In The Project). Finished Dimensions 650 Mm (Width) X 1200 Mm (Length) Front Panel In Mdp Or Mdf, Coated On Both Sides In Low Pressure Melamine Laminate – Bp, Frost Finish, In Gray Color. Finished Dimensions Of 250 Mm (Height) X 1119 Mm (Length) X 18 Mm (Thickness) Allowing Tolerances Of +/- 2 Mm For Width And Length And +/-0.6 Mm For Thickness.  Tops Of The Top And Front Panel Topped With Pvc (Polyvinyl Chloride) Edge Strip With Primer, Textured Finish In Gray Color, Glued With Hotmelting Adhesive. Nominal Dimensions Of 22 Mm (Width) X 3 Mm (Thickness), With Tolerance Of + Or - 0.5 Mm For Thickness.  Structure Composed Of: 4 - Vertical Uprights Made Of Cold Rolled Carbon Steel Tube, With Seam, Oblong Section Of 29 Mm X 58 Mm, In Plate 16 (1.5 Mm). - Upper Beam Made Of Cold-Rolled Carbon Steel Tube, Curved Into A “C” Shape, With A Circular Section Of Ø = 31.75Mm (1 1/4”), 5Mm). - Feet Made Of Cold-Rolled Carbon Steel Tube, Circular Section Of Ø = 38Mm (1 1/2”), 5Mm). -, Steel Cabinet – 2 Doors/ 4 Shelves Minimum Descriptions:High Steel Cabinet, Divided Vertically Into Two Compartments By Means Of Dividers With Independent Doors, Equipped With Four Removable And Adjustable Shelves In Each Compartment. Dimensions And Tolerances:Width: 0.90 Mm +/- 10 Mm; Plate 22 (0.75 Mm).Shelves And Door Reinforcement In Cold Rolled Steel Sheet - Plate 20 (0.90 Mm). (Minimum) Doorknob With At Least 4 Pins.Duplicate Keys Attached To The Corresponding Doorknobs.Printed Or Superimposed Label Holder, The Latter Being Exclusively Made Of Chromed Non-Ferrous Metal Alloy.Epoxy/Polyester Hybrid Powder Paint Painting, Glossy Electrostatic, Oven Polymerized, Thick Minimum 40 Micrometers In Gray Color, Individual Yellow Student Set Minimum Descriptions:Set For Children With Height Between 1.19 And 1.42M, Consisting Of A Table And A Table