Ignition Device Zu35-800L. Technical Characteristics: Supply Voltage - 7300V; With Ceramic Tube And Stainless Steel Core Du-4Mm; Outer Diameter - 27Mm; The Length Of The Immersed Part Of The Igniter Is 800Mm. The Diameter Of The Threaded Connection Is 22*1.5Mm. Gost R 52229-2004., Frequency Converter Vfd500-018G/022Pt4b. Power, W 18500. Voltage, V 380. Protection Degree Ip 20. Maximum Cross-Section Of The Connected Cable, Sq. Mm 16. Operating Temperature, °C From -10 To +40. Gost 16313-97, Ignition Transformer Os33-730(740) In A Housing. Technical Characteristics: Rated Primary Voltage, V: - 200V; Rated Secondary Voltage, V - 7500V; Rated Secondary Current, Ma - 30Ma; Relative Switching Duration (Sr), % - 20%; Duration Of Operation In Continuous Arc Burning Mode, Minutes - No More Than 7 Minutes; Degree Of Protection (Dust And Moisture Protection) - Ip54. Gost Iec 61558-2-3-2015., Power Supply Bp24.3. Supply Voltage 220V. Input Voltage 24V.2.5A Type Of Climatic Version Uhl4. Operating Temperature Range From -20°C To +50°C With Relative Humidity Not Exceeding 80% And Atmospheric Pressure From 86 To 106.7 Kpa. 35Mm Din Rail Mounting. With Relay, Contact Load 6A, 240V. Year Of Manufacture 2024. State Verification 2024. Gost 15150-69. New, Never Used. A Passport Is Required., Measuring Pressure Transducer Pd100-Di-0.6-111-0.5; Technical Characteristics: Measured Pressure Range 0-1Kgf/Cm2; Accuracy Class - 0.5; Output - 4-20Ma; Power Supply - 12-36V; Execution - General Industrial; Membrane Material Stainless Steel Aisi316l; Connection To The Processor - M20*1.5 Fitting, Din43650a Connector; Socket Included Without Indication; Ambient Temperature -40 To +100C; Overload 200%, Calibration Interval 5 Years; Degree Of Protection - Ip65. Gost 22520-85., Flame Control And Ignition Control Device F-34-2, Electronic, Two-Channel. Technical Characteristics: Ambient Temperature - From 5 To 50°C; Voltage - ~220V; Frequency - From 48 To 62Hz; Power Consumption Is No More Than 20Va. Gost Iso 23551-6-2023.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
