180 Mm Long, Made Of Carbon Steel 45, Black Nickel Plated On The Working Parts. The Handles Are Two-Component, Must Have An Ergonomic Shape And Are Equipped With Finger Rests. Jaws With Serrated Surface And Special Grooves, Scoop Shovel - 2 Pcs Length - 1375Mm Blade Material - Powder Coated Steel Blade Thickness - 1.6 Mm. The Width Of The Working Part Is 235 Mm. Fastening The Blade To The Handle With One Galvanized Self-Tapping Screw. Handle Material: Hardwood, Handle Diameter: 40 Mm, Bayonet Shovel - 3 Pcs Length - 1430 Mm Blade Material - Hardened Carbon Steel, Powder Coated Blade Thickness - 1.6 Mm. The Width Of The Working Part Is 205 Mm. Fastening The Blade To The Handle With One Galvanized Self-Tapping Screw. Handle Material: Hardwood, Handle Diameter: 40 Mm, 5 Meters Steel Tape, Tape Width 19 Mm Lock Button On The Front Of The Case, As Well As 2 Pause Buttons On The Side And Bottom Of Its Surface Case Made Of Rubberized Abs Plastic, Frost-Resistant Snow Shovel, With Aluminum Edge Dimensions: Working Part Length 50-60 Cm, Width 28-30 Cm Impact-Resistant Plastic With Steel Handle, Phillips Screwdriver - Screwdriver Type - Standard, Tip Type Ph (Phillips, Cross), Counter Length -355 Mm Ph2 X 200 Mm, Rod Length - 200 Mm, Rod Material - Cr-V Steel, With Magnetic Properties, Straight Handle Shape, 3-Component Handle,, Spatula Blade Made Of Stainless Steel Blade Width 150 Mm - 3 Pieces Spatula Handle Specially Curved, Handle Material Is Plastic, Teeth Size 8*8 Mm Spatula Blade Made Of Stainless Steel Blade Width 300 Mm - 3 Pieces Spatula Handle Specially Curved, Handle Material Is Plastic, Teeth Size 8*8 Mm, Straight Flat Screwdriver - 5 Pieces Rod Length, Mm 150 Rod Material Cr-V Slot Size Sl8 Straight Spline Type - Sl, Garden Pruning Shears For Pruning Plants And Trees With Rubberized Handles And A Return Spring. Secateur Size -200Mm Maximum Cutting Diameter 15-20 Mm Working Part Made Of Carbon Steel., Steel Rake Assembled With A Wooden Handle, 360 Mm, 1300 Mm Long, With 14 Straight Teeth, Designed For Gardening Work. 14 Flat Teeth Pointed At The Ends. The Material Of The Working Part Is Steel Coated With Powder Enamel, The Width Of The Working Part Is 360 Mm. Handle Material - Hardwood, Carpentry Saw Made Of Cold-Rolled Steel 65Mn Blade Length 450 Mm, Hardened Teeth With A Pitch Of 7-8 Tpi And 3D Sharpening, With Teflon-Coated Blade And 2-Component Handle, Designed For Longitudinal And Transverse Sawing Of Wood, Plywood And Chipboard. The Two-Component Handle Is Attached To The Blade With 3 Screws, Metal Scissors 17.5 Cm Handles With Rubber Inserts
