Wash Basin: Manufacture And Installation Of A One-Piece Hand Wash Basin In 304 Stainless Steel, With Tap, 1Mm Thick Plate, With Mechanical Knee Drive, With 01 Basin And American Valve For Water Outlet. Finish: Brushed Steel. Total Dimension: L = 40 Cm X W = 35 Cm And Depth Of 30 Cm. Including The Supply And Installation Of The Sink Drain Valves., Sink 01: Manufacture And Installation Of A Stainless Steel Sink, 10 Cm Mirror And Perforated Shelf, Manufactured With 304 Stainless Steel With A Thickness Of 1 Mm And Brushed Finish; Top And Shelf With 3Cm Edge. The Top Must Have A Recess For Water; Total Dimensions: 2.80M Height With Mirror 100Cm. With Two Drawers Measuring 45Cm In Height X 40Cm In Width And 50Cm In Depth, With Telescopic Slides And Stainless Steel Handles. Feet In 304 1, 1/2 Stainless Steel Tube, 1Mm Thick, With Black Shoe And Leveling Adjustment. Shelf With Slits/Openings At The Bottom, Starting At 0.15 Cm From The Floor. Reinforced, Fully Welded Product. Including The Supply And Installation Of The Sink Drain Valves And The Water Inlet In Chrome Finish., Counter 01: Manufacture And Installation Of A Stainless Steel Counter With A 3 Cm Edge And A 10 Cm Mirror, Manufactured With 304 Stainless Steel With A Thickness Of 1 Mm And A Brushed Finish; Total Dimensions: 1.60Mx 0.90M (W X D X H), With Three Drawers On The Left Side Measuring 40Cm (Width) With Telescopic Slides, Stainless Steel Handles And Hinges. Six Feet In 304 1 Stainless Steel Tube, With Black Shoe And Leveling Adjustment, Height Of 0.15 M. Reinforced Product, Entirely Welded., Table 01: Manufacture And Installation Of Brushed 304 Stainless Steel Table With Lower Shelf. Top And Shelf With 3Cm Edge. Thickness 1 Mm. Structure Made From 38Mm Tube In 304 Stainless Steel With Leveling Shoes. Lower Shelf In Brushed 304 Steel, Starting 15 Cm From The Floor. Total Dimensions: 1.00M X 0.90M X 0.85M (W X D X H). Reinforced, Entirely Welded Product, Which Must Also Withstand Lateral Forces From Activities Such As Kneading Bread And Pasta, Among Others., Table 02: Manufacturing And Installation Of Table In Brushed 304 Stainless Steel With Perforated Lower Shelf. Top And Shelf With 3Cm Edge. 10Cm Mirror On The Bottom And Right Side, Bottom Shelf With Tears/Openings. Thickness 1 Mm. Structure Made From 38Mm Tube In 304 Stainless Steel With Leveling Shoes. Lower Shelf In Brushed 304 Stainless Steel, Starting 15 Cm From The Floor. Total Dimensions: 0.95M X 0.90M (W X D X H). Height With Mirror 1M. Reinforced Product
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
