Bids Are Invited For Hiring A Company For The Lowest Overall Price And Under A Global Contract Regime For The Construction Of A Retaining Wall And Grandstand In Campo Serra Verde - Abel Carvalho, Special Federal Transfer Modality Action Plan: 09032024-069662/2024 - Parliamentary Amendment: 202444720003.

1.1 Supply And Installation Of Workplate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, 1.2 Conventional Location Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, 1.3 Mobilization Or Demobilization Of Container, Including Loading, Unloading And Transport By Truck Body With Crane (Munck), Exclusive Container Rental, 1.4 Container Rental 2, 30 (Does Not Include Mobilization/Demobilization), 2.1 Local Administration, 3.1 Manual Excavation For Baldrame Beam Or Footing (Including Excavation For Placing Formwork). Af_01/2024, 3.2 Manufacture, Assembly And Disassembly Of Formwork For Running Shoes, Made Of Resin Plywood Sheet, E=17 Mm, 4 Uses. Af_01/2024, 3.3 Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, 3.4 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2022, 3.5 Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, 3.6 Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, 3.7 Concreting Of Running Shoes, Fck 30 Mpa, Using A Pump - Laying, Densifying And Finishing. Af_01/2024, 4.1 Manufacture, Assembly And Disassembly Of Formwork For Baldrame Beam, In Sawn Wood, E=25 Mm, 4.2 Pillar Frame Or Beam Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, 4.3 Isolated Footing Frame, 4.4 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12 Ca-50 Steel, 4.5 Concreting Of Crowning Block Or Baldrame Beam, 4.6 Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, 5.1 Manufacture Of Formwork For Columns And Similar Structures, E=25 Mm. Af_09/2020, 5.2 Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Straight Foot, 4 Uses. Af_09/2020, 5.3 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5 Ca-60 Steel, 5.4 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 12 Steel, 5.5 Supply Of Structural Concrete, Pumped Machined, With Fck 30Mpa, Including Launching, Thickening And Finishing, 6.1 Full Concrete Block Masonry Without Reinforcement, In Concrete With Fck Of 20Mpa, Esp. 19Cm, For Cladding, Including Mortar For Laying (Detail D - Seds Sicor-Mg Notebook). Including Drainage Tube, 6.2 Block Frame, Insulated Shoe, Baldrame Beam And Running Shoe Using 12.5 Mm Ca-50 Steel - Assembly. Af_01/2024, 6.3 Block Frame Using 6.3 Mm Ca-50 Steel - Assembly. Af_01/2024, 6.4 Acrylic Sealer Base, Manual Application To Wall, One Coat. Af_04/2023, 6.5 Economical Acrylic Latex Paint, Manual Application On Walls, Two Coats. Af_04/2023, 6.6 Subsurface Drain (Section 0.40 Af_07/2021, 7.1 Full Concrete Block Masonry Without Frame, 7.2 Frame Using Ca-25 10 Steel, 7.3 Execution Of Walkway (Sidewalk) Or Concrete Floor With Concrete Molded In Place, Made On Site, Conventional Finish, Thickness 6 Cm, Reinforced. Af_08/2022, 7.4 Plaster Or Single Putty In Trace Mortar