1.1. Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, 1.2. Local Administration, 2.1. Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, 2.2. Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, 2.3. Preparation Of The Bottom Of A Trench With A Width Of Less Than 1.5 M (Natural Soil Adjustment). Af_08/2020, 2.4. Slim Concrete Ballast, Applied To Crowning Blocks Or Footings, Thickness Of 5 Cm Af_01/2024, 2.5. Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, 2.6. Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 6.3 Mm Ca-50 Steel - Assembly. Af_01/2024, 2.7. Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, 2.8. Shoe Concreting, Fck 30 Mpa, Using Jerica - Laying, Densifying And Finishing. Af_01/2024, 2.9. Manual Trench Backfilling, With Vibrating Plate. Af_08/2023, 2.10. Chapisco Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Trace 1:3 With Manual Preparation. Af_10/2022, 2.11. Surface Waterproofing With Polymeric Mortar / Acrylic Membrane, 3 Coats. Af_09/2023, 2.12. Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, 3.1. Assembling And Dismantling Formwork For Rectangular Pillars And Similar Structures, Simple Straight Leg, Made Of Plasticized Plywood Sheet, 18 Uses. Af_09/2020, 3.2. Assembly And Disassembly Of Formwork For Rectangular Columns And Similar Structures With Simple Straight Legs, 3.3. Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Fork, In Resined Wood Sheet, 8 Uses. Af_09/2020, 3.4. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, 3.5. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, 3.6. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8, 3.7 Ca-50 Steel. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10, 3.8 Ca-50 Steel. Unidirectional Precast Slab, Bi-Supported, For Floor, Ceramic Filling, Conventional Joist, Total Slab Height (Filling+Cover) (8+4). Af_11/2020, 3.9. Concreting Of Pillars, Fck 25 Mpa, Using Buckets - Laying, Thickening And Finishing Af_02/2022, 3.10. Concreting Of Beams And Slabs, Fck25 Mpa, For Any Type Of Slab With Buckets In A Ground Floor Building - Laying, Thickening And Finishing. Af_02/2022, 4.1. Fence Masonry Made Of Horizontally Drilled Ceramic Blocks Measuring 9X19x39 Cm (Thickness 9 Cm) And Laying Mortar With Manual Preparation. Af_12/2021, 4.2. In-Situ Molded Lintel Using Channel Blocks, 10 Cm Thick. Af_03/2024, 4.3. Reverse Molded In Place Using Channel Blocks, 4.4. Opening Aluminum Door With Paneling, With Trim, Fastening With Screws - Supply And Installation. Af_12/2019, 4.5. Sliding Aluminum Window With 2 Panes For Glazing (Glass Included), Frame/Frame 6 To 14 Cm, Acetate Or Glossy Finish, Screw Fastening, Without Trim/Strip, Dimensions 100X120 Cm, Silicone Sealing, Exclusive Contramarco - Supplies
