Tenders Are Invited For Reconstruction Of District Road No. 3310D, Km 5+380 - 6+207 [Flood - September 2024]

1. Name Of The Task Assigned By The Ordering Party: Reconstruction Of District Road No. 3310D, Km 5+380 - 6+207 [Flood - September 2024]2. The Subject Of This Public Procurement Is: Construction Works3. The Scope Of The Order Includes: - Cutting And Filling Roadsides With Crushed Aggregate; - Cold Milling Of Asphalt Surfaces; - Mechanical Profiling And Compaction Of The Subgrade After Milling For Construction Layers; - Leveling The Subgrade With Crushed Stone. Up To 10 Cm, With Appropriate Compaction To Strengthen The Foundation; - Excavation And Construction Of A Deep Trough. 20 Cm For The Designed Slopes; - Making A Base Of Crushed Aggregate, Upper Layer Thick. 20 Cm On Exits; - Cleaning And Mechanical Spraying Of Structural Layers With Asphalt Emulsion; - Asphalt Concrete Surface, Binding Layer, Ac 16 Asphalt Concrete, 6 Cm Thick; - Asphalt Concrete Surface, Wearing Course, Ac 11 S Asphalt Concrete, 4 Cm Thick; - Cleaning The Ditch From Silt With A Silt Thickness Of Up To 20 Cm. - Clearing Bushes And Undergrowth With Removal Of The Remains4. A Detailed Description Of The Subject Of The Order Is Specified In: 1) Auxiliary Cost Estimate - Appendices No. 11 To Swz2) Drawing Documentation - Appendix No. 12 To Swz5. Detailed Technical Conditions For The Execution Of Works Are Specified In: Detailed Technical Specification (Sst) - Annex No. 13 To Swz.6. Whenever References To Standards, European Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 And Section 3 Of The Public Procurement Law, The Contractor Should Assume That Such A Reference Is Accompanied By The Words Or Equivalent. If References To Standards, European Technical Assessments, Technical Specifications And Technical Reference Systems Are Used In The Design Documentation, The Ordering Party Allows Solutions Equivalent To Those Described. When Analyzing The Design Documentation, The Contractor Should Assume That Each Reference Used In The Design Documentation Is Accompanied By The Word Or Equivalent. If Trademarks Are Used In The Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, It Means That They Are Provided As Examples And Specify Only The Minimum Expected Quality Parameters And The Required Standard. The Contractor May Use Equivalent Materials Or Devices, But With Similar Or Better Technical And Quality Parameters, The Use Of Which Will In No Way Adversely Affect The Proper Functioning Of The Solutions Adopted In The Design Documentation. The Contractor Who Uses Equivalent Devices Or Materials Will Be Obliged To Demonstrate During The Execution Of The Order That The Devices And Materials Used By Him Meet The Requirements Specified By The Ordering Party. The Use Of A Label In The Design Documentation Means That The Ordering Party Accepts All Labels Confirming That Given Construction Works, Supplies Or Services Meet The Equivalent Requirements Of The Label Specified By The Or