Tenders Are Invited For Accessory Factory Of A New Backhoe Loader As Part Of The Implementation. Threshold. Civil Protection And Civil Defense. For 2025/2026 At Gm. Trucks As Part Of The Task. - Providing Civil Protection Entities With Needed Equipment

1. The Subject Of The Order Is The Delivery Of A Brand New Backhoe Loader As Part Of The Implementation Of The Civil Protection And Civil Defense Program For 2025/2026 In The Ciezowice Commune.2. Required Minimum Technical Parameters: Brand New Backhoe Loader, Year Of Production Min. 2025 (Demo Or Prototype Versions Are Not Allowed). The Backhoe Loader Should Be Adapted To Travel On Public Roads. Engine1) Diesel Engine, Minimum Four-Cylinder.2) Engine Power Minimum 110 Hp.3) Exhaust Emissions According To Eu Standard Minimum Stage V.4) Engine Capacity Not Less Than 4500 Cm3.5) Torque Min. 500 Nm. Drive System1) Backhoe Loader Equipped With An Automatic Gearbox With Minimum 6-Speed Forward And Minimum 3-Speed Reverse.2) Four-Wheel Drive.3) Lsd Type Differential Lock.4) Forward Speed Of The Backhoe Loader: Minimum 40 Km/H.5) Selecting The Driving Direction Using An Electric Switch In The Steering Column Or Joystick.6) Road Wheels: Front Min. 20 Inches, Rear Min. 26 Inches.7) Tilt Front Axle.8) Front Swivel Wheels.9) Hydraulically Assisted Steering System With The Possibility Of Emergency Control Of The Machine. Hydraulic System:1) Hydraulic System Powered By A Multi-Piston Pump With A Capacity Of Min. 165 L/Min. And Working Pressure Min. 250 Bar. Rear Supports: 1) Vertical Stabilizing Supports With Adjustable Wear Linings. 2) Independent, Extendable Hydraulic Supports. Parameters Of The Excavator Arm: 1) Arm Control Using A Joystick/S. 2) Excavator Arm Sliding Mechanism. 3) Mechanical Excavator Quick Coupler. 4) Depth Digging Mines 5.80 M.5) Excavator Arm With Variable Length, Hydraulically Extendable (Telescopic).6) Factory Two-Way Installation For Operating A Hammer, Milling Machine, Tilting Grading Bucket And Drilling Rig.7) Load Capacity With The Arm Folded (Without Telescopic Extension) Min. 1400 Kg. Parameters Of The Loading Arm: 1) Arm Control Using Joystick(S). 2) Loading Height Minimum 3000 Mm. 3) Arm Or Bucket With Automatic Leveling Function. 4) Lifting Height On Forks Minimum 2 800 Mm. 5) Return System For Digging The Loader Bucket. Bucket Working Attachments Compatible With The Offered Backhoe Loader - Digging:1) Backhoe Bucket With A Width Of Min. 400 Mm.2) Backhoe Bucket With A Width Of Min. 600 Mm.3) Excavator Bucket With A Width Of 1500 Mm, Hydraulic Tilting Slope. Bucket Work Equipment Compatible With The Offered Backhoe Loader - Loading:1) 6-In-1 Two-Part Multifunctional Bucket With Teeth And Forks (Pushing, Loading, Digging, Grabbing, Spreading, Leveling) With A Minimum Capacity Of 1.2 M³ And A Width Of Min. 2.35 M.Cabin:1) Cabin Meeting Rops And Fops Safety Standards.2) Manual Or Automatic Air Conditioning.3) Display In The Cabin.4) Heated Cabin.5) Steering Column With Tilt Adjustment.6) Steering Wheel Knob.7) Noise Level In The Operators Cabin Maximum 75 Db.8) Orange Led Warning Light, Min. 4 Pcs. Placed On The Roof Of The Machine.9) Road Lighting: Position Lights, Dipped Beam, Road Lights, Direction Indicators, Brake Lights.