Quotation are invited for Cable;Airdac;10mm²Equiv;Tccaa;1c;Sne;Blk Delivery Date: 2025/11/12 Delivery To: Electricity - Ndabeni RED1 Plant / PH: 511 0410 Delivery Address: 13 Melck Street, Ndabeni Closing Date: 2025/11/06 Closing Time: 12:00 PM Description: 3,000 meter x cable;airdac;10mm²equiv;tccaa;1c;sne;blk Specification: * CABLE;Airdac;10mm²Equiv;TCCAA;1c;SNE;BlkSS SECTIONAL AREA: 10mm² Cu Equiv); CORE CONDUCTOR MATERIAL: Tinned Copper Clad Aluminium Alloy (TCCAA); NUMBER OF CORES: 1 Core consisting of 7 strands; CONSTRUCTION NEUTRAL AND EARTH: Split Neutral and Earth (SNE); CONSTRUCTION CORE CONDUCTOR: Tinned Copper Clad Aluminium Alloy red XLPE sheathed; CONSTRUCTION NEUTRAL CONDUCTOR: Tinned Copper Clad Aluminium Alloy PVC insulated conductor; CONSTRUCTION EARTH CONDUCTOR: Tinned Copper Clad Aluminium Alloy bare conductor; CONSTRUCTION PILOT CONDUCTOR: 2 off stranded Cu Conductor PVC Insulated; OUTER-SHEATH MATERIAL: The sheath shall consist of an extruded layer of type PS1 (Black) polyethylene in accordance with SANS 1411-7.; VOLTAGE RATING: 600/1000V; LENGTH: 500m; STANDARD: SANS 1507-6; SPECIFICATION: The TCCAA conductor shall comply with NRS 110 CCAA 10; CABLE IDENTIFICATION MARKING: All cables shall have the Manufacturers name, the cable size, the operating voltage, the year of manufacture and the wording "CITY OF CAPETOWN # CCAA conductor no resell value " clearly embossed or indented in a permanent and indelible manner on separate lines on the outer sheaths throughout the entire length of each cable. The identification markings shall be in accordance with SANS 1507-1. The cable length on all cables shall be clearly marked on the outer sheath at one meter intervals, numbered from the centre of the drum to the outside. Length markings shall be by either embossing or indenting.; GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". ***PLEASE REFER TO THE ATTACHED PRC DOCUMENT*** CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared non-responsive. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/311780
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
