Tenders Are Invited For Installation Of Cold Room At Antelias Central Testing

Tenders are invited for Installation of Cold Room at Antelias Central Testing A- Insulation: A.1-Insulation panels (walls, ceiling and floor): Walls ceiling and floor panels should be manufactured in a double-band laminator. Excellent bonding between the fire-rated PIR core and the twin steel skins of the panels, high-density foam 40 Kg/m3. Wall panels should be excellent for the construction of interior and exterior walls in factories where temperature and humidity control are important. The double tongue and groove edge design should eliminate the risk of thermal bridging and provides an air-tight joint between panels after construction. Upon full curing of the foam, panel edges shall be milled to ensure precise interlocking and dimensional accuracy. Panels shall be available in ribbed, flat, or micro-rib surface finishes. Installation shall allow for both vertical and horizontal orientation. Roof panels shall incorporate trapezium profiles, offering high spanning capacity and reliable performance under varying climatic conditions. The sandwich panels are ideal for: - Laboratories - Blood Banks - Controlled temperature industrial building - Meat processing industry - Fish processing industry - Supermarkets - Distribution centers - The organic sector - High-rise buildings etc..... Module: Cover width: 1.000 mm Dimensions: - Minimum length : 2.000 mm - Maximum length : 19.300 mm - Tolerances : 1. Width : ±2 mm 2. Length : ± 5 mm 3. Thickness : ± 2 mm (D 100 mm) 4. Thickness : ± 3 mm (D 100 mm Fire performance: According to TS EN 13501-1: B-s1; d0 for PIR insulated cold storage panels Certification: Kalite Belgeleri Quality Certificates Insulation: - Rigid Polyurethane foam (PIR) - Density: ± 40 Kg/m3 (Tol. ± 5 Kg/m3 ) - Density of core : min. 30 Kg/m3 - Lambda value : 0.0213 W/mk (NBN : BS1D0) - CFC Free NBN S-21.203 Foam = A4 Panel = A1 NFP 92-507 Foam = M4 Panels = M2 DIN 4102-1 Foam = B3 BS 476-7 Panels = class1 NEN 3883 Panels = class 1 Standard panel facing: Lacquered galvanized steel plate with removable protection film - Thickness: - F2 = Exterior facing 0.63 mm including finish - F1 = Interior facing 0.53 mm including finish - Color: White lacquered 9002 (RAL) (W) - Lacquer: Polyester coating 20 my + Primer Coating 5 my - suitable for food process purposes - Uses: For interior and exterior applications (Non-aggressive environment) - Variation of color: E 1 Panels surface finishing is chemically inert polyester paint, applied to pre-treated metal, and specifically developed for controlled environments. Characteristics: - Food safety suitable for surfaces immediately behind food preparation, processing surfaces or equipment. - Easy to clean. - Resistant to staining, mold growth and surface extraction. - Good robustness. - Good chemical and humidity corrosion resistance. - Non-toxic. - Resistant to impact and surface wear A.2- Floor insulation cover: Floor panels are covered with the following cover designed 2.5/4mm-raised pattern=750 kg, charge on 4 rubberized wheels - Marine plywood (WBP) 9 mm - Checkered aluminum sheets 3 mm B. Doors: The rooms are equipped with manual doors. Each door is equipped with door leaf of same material as panels and COLDTECH (Italy) accessories, and safety lock to avoid personnel from being trapped inside. Freezer door is equipped with door heater & PVC curtain. The rooms are equipped with doors according to the following schedule: C. Refrigeration system: C.1 condensing units specification for freezer room: Mailing address : Lebanese Red Cross Head Quarters, Spears Street, Kantari, Beirut, Lebanon Please submit your bid in a SEALED Envelope to FINANCE DEPARTMENT at 1st Floor PLEASE NOTE: NO BIDS WILL BE ACCEPTED AFTER THE ABOVE CLOSING TIME AND DATE BID SHOULD BE SUBMITTED IN TYPING AND NOT HAND WRITTEN (hand-written will be considered as ineligible) Delivery address of the Bid: Lebanese Red Cross Head Quarters, Finance Sector, 2st floor, Spears Street, Kantari, Beirut, Lebanon ITB Published Date: October 31, 2025 Bid Submission deadline: November 10, 2025 / Time: 12:00 p.m. Deadline for questions: November 05, 2025 / Time: 12:00 p.m. Bids to be marked: Tender reference: 2025-073 Do does not open before November 10, 2025 Tender Link : https://www.redcross.org.lb/tenders/